User Guide
2 Internet Faxing
38
2.3 Timer Transmission
A document can be scanned and stored in the memory to be sent at a
specified time.
Note
To use timer transmission
1. Position the document to be faxed.
2. If necessary, change the “Resolution” setting (p. 29).
3. Press the
[FAX SET]
key.
4. From the 10-key pad, press the
[2]
key.
Otherwise, press the
[FAX SET]
key
twice to select “
2 TIMER TX
”, and
then press the
[YES]
key.
5. Using the 10-key pad, enter the
desired transmission time, and then
press the
[ENTER]
key.
• If you wish to change the time, press
the
[CLEAR]
key, and then enter the
correct time.
6. Specify the recipient.
• Refer to “2.2.2 Specifying the
Recipient” (p. 30).
7. Press the
[START]
key.
The machine scans the document, then enters transmission standby mode.
• The time is set on a 24-hour system.
• If the machine is not programmed with the current time, the fax cannot
be sent at the specified time.
• Timer transmission can be combined with broadcast transmission.
IF-102.book Page 38 Friday, June 21, 2002 1:22 PM