User Guide
3 Network Scanning
44
3.1.1 Using the Automatic Document Feeder
Note
1. Press the
[SCAN]
key.
The machine enters Scan mode, and
the scan screen appears.
2. Load the document to be scanned into
the Automatic Document Feeder.
• Adjust the Document Guide Plates
to fit the size of the document.
• Load the document with the side to
be scanned facing up.
3. Press the
[MAIL]
key.
The
[MAIL]
key lights up, and an e-
mail address can be entered.
4. Enter the e-mail address of the recipi-
ent, and then press the
[ENTER]
key.
• The e-mail address of a previously programmed recipient can also be
specified. Refer to “2.2.2 Specifying the Recipient” (p. 30).
• If settings such as the subject, cc recipient and resolution are not to be
specified, press the
[START]
key, instead of pressing the
[ENTER]
key.
• For details on entering text, such as the e-mail address and subject,
refer to “1.5 Entering Text” (p. 9).
IF-102.book Page 44 Friday, June 21, 2002 1:22 PM