User Guide

3 Network Scanning
46
3.1.2 Positioning Documents on the Original Glass
1. Press the
[SCAN]
key.
The machine enters Scan mode, and
the scan screen appears.
2. Lift open the Original Cover, and then
position the document to be scanned
on the Original Glass.
• Position the document with the side
to be scanned facing down.
• Align the document on the scales
above and to the left of the original
glass.
3. Press the
[MAIL]
key.
The
[MAIL]
key lights up, and an e-
mail address can be entered.
4. Enter the e-mail address of the recipi-
ent, and then press the
[ENTER]
key.
• The e-mail address of a previously
programmed recipient can also be
specified. Refer to “2.2.2 Specifying
the Recipient” (p. 30).
• If settings such as the subject, cc recipient and resolution are not to be
specified, press the
[START]
key, instead of pressing the
[ENTER]
key.
(Skip to step 8.)
IF-102.book Page 46 Friday, June 21, 2002 1:22 PM