User Guide

3 Network Scanning
48
11. If the document to be faxed contains
multiple pages, position the next page
of the document on the Original Glass
when the screen shown at the right
appears, and then press the
[YES]
key.
• Repeat step 11 until all pages of the document have been scanned.
12. Press the
[START]
key to begin transmitting.
To change the Scan mode settings
From the screen allowing you to select the resolution, you can change
various Scan mode settings. If you do not wish to change the settings,
documents will be transmitted from Scan mode with the manufacturer’s
default settings or with the settings specified using the INITIAL SET mode.
1. From the screen allowing you to select
a resolution, press the key.
A screen appears, allowing the
scanning resolution to be specified.
2. Press the
[DENSITY SET]
key to select
between the “
[A]
” (AUTO), “
PHOTO
”
and “
TEXT
” settings.
• The current setting appears on the
left side of the screen.
3. If the “
PHOTO
” or “
TEXT
” setting
was selected, use the and keys
to adjust the density level.
4. To specify another setting, press the
key. (Continue with step 5.)
To finish setting the Scan mode, press
the
[START]
key.
5. Using the and keys, select the
format (either “
TIFF
” or “
PDF
”) for
the data that will be attached to e-mail.
IF-102.book Page 48 Friday, June 21, 2002 1:22 PM