User Guide

3 Network Scanning
49
6. To specify another setting, press the key. (Continue with step 7.)
To finish setting the Scan mode, press the
[START]
key.
7. Using the and keys, select the
compression encoding method (“
MH
”,
“
MR
” or “
MMR
”).
8. Press the
[START]
key to return to the scan screen.
A screen appears, allowing you to select the document mode.
To change the scanning size
From the screen allowing you to select the document mode, you can change
the scanning size setting.
1. From the screen allowing you to select
the document mode (either “
ADF
” or
“
BOOK
”), press the key.
• If “
ADF
” was selected, continue with step 2.
• If “
BOOK
” was selected, skip to step 3.
2. Using the and keys, select
whether the document size is automat-
ically detected (“
AUTO
”) or the scan-
ning size is specified (“
MANUAL
”),
and then press the
[YES]
key.
• If “
AUTO
” was selected, a screen
appears, allowing you to select the
document mode.
• If “
MANUAL
” was selected, skip to step 3.
3. Using the and keys, select the
scanning size, and then press the
[YES]
key.
The screen allowing you to select
the document mode appears.
If the memory becomes full while scanning documents
If the memory becomes full while a document is being scanned, the
transmission is cancelled.
IF-102.book Page 49 Friday, June 21, 2002 1:22 PM