User Guide

3 Network Scanning
50
3.2 Uploading to an FTP Server (Scan to Server)
Tip
• In order to access an FTP server, certain settings such as the FTP
server address must be set in advance. These settings can be
specified using Network Management Utility Light. (For details, refer
to the Network Management Utility Light for IF-102 User’s Manual.)
• In addition, a specified recipient can be notified by e-mail of the FTP
server address that the data was uploaded to. This setting can be
specified using Network Management Utility Light. (For details, refer
to the Network Management Utility Light for IF-102 User’s Manual.)
• With the “200 × 200 dpi” resolution setting and “MH” compression
encoding method setting, approximately 100 A4 or Letter-size
document pages can be scanned at one time (approximately 260
pages if the optional “8 MB Memory for Fax” is installed).
• To stop scanning, press the [STOP] key.
• If the transmission could not be completed correctly, a transmission
result report is printed.
• To cancel the transmission of scan data that is queued, select
“CANCEL RESERV.” with the [FAX SET] key. (p. 39)
IF-102.book Page 50 Friday, June 21, 2002 1:22 PM