User Guide

3 Network Scanning
54
4. Press the
[ENTER]
key.
• If settings such as the resolution are
not to be specified, press the
[START]
key, instead of pressing the
[ENTER]
key.
5. Using the and keys, select the
desired resolution (200
×
200 dpi, 300
×
300 dpi or 600
×
600 dpi), and then
press the
[ENTER]
key.
• To specify detailed Scan mode set-
tings, press the key.
For details on changing the settings,
refer to “ To change the Scan mode settings” (p. 48).
6. Using the and keys, select
“
BOOK
”.
• To change the scanning size, press
the key.
For details on changing the setting,
refer to “ To change the scanning
size” (p. 49).
7. Press the
[YES]
key to scan the page.
8. If the document to be faxed contains
multiple pages, position the next page
of the document on the Original Glass
when the screen shown at the right
appears, and then press the
[YES]
key.
• Repeat step 8 until all pages of the document have been scanned.
9. Press the
[START]
key to connect to the FTP server and begin uploading.
Tip
• In order to send to a specified recipient (only one) a notification of the
FTP server address where the data was uploaded, set “E-mail
Notification” when programming the speed dial number using Network
Management Utility Light. For details, refer to the Network
Management Utility Light for IF-102 User’s Manual.
IF-102.book Page 54 Friday, June 21, 2002 1:22 PM