User Guide
4 INITIAL SET Mode Settings
55
4 INITIAL SET Mode Settings
4.1 Programming Scan Settings (“SCAN SET-
TING” Menu)
From the “
SCAN SETTING
” menu, the default settings for the resolution,
data format and compression encoding method during scanning and
transmission with network scanning can be changed.
4.1.1 Setting the “RESOLUTION” Function
1. Press the
[INITIAL SET]
key.
2. Using the and keys, select
“
SCAN SETTING
”.
3. Press the
[1]
key from the 10-key pad
to select “
RESOLUTION
”.
4. Using the and keys, select the
desired resolution (200
×
200 dpi, 300
×
300 dpi or 600
×
600 dpi), and then
press the
[YES]
key.
The “
SCAN SETTING
” menu
appears again.
4.1.2 Setting the “IMAGE FORMAT” Function
1. Press the
[INITIAL SET]
key.
2. Using the and keys, select
“
SCAN SETTING
”.
3. Press the
[2]
key from the 10-key pad
to select “
IMAGE FORMAT
”.
IF-102.book Page 55 Friday, June 21, 2002 1:22 PM