User Guide
4 INITIAL SET Mode Settings
57
4.2 Programming E-mail Addresses
The procedures for programming one-touch dial keys and speed dial
numbers with e-mail addresses are described below.
Note
4.2.1 Programming One-Touch Dial Keys
1. Press the
[INITIAL SET]
key.
2. Press the key 6 times to select
“
FAX REGISTRATION
”.
3. Press the
[1]
key from the 10-key pad
to select “
ONE-TOUCH DIAL
”.
4. Press the one-touch dial key that you
wish to program.
5. Enter the e-mail address of the recipi-
ent.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The e-mail address can contain a
maximum of 64 characters.
• If only numbers are entered, it will
be regarded as a fax number.
6. Press the
[ENTER]
key.
• For details on entering text, refer to “1.5 Entering Text” (p. 9).
• If the e-mail address does not contain “@”, the
[YES]
key cannot be
pressed.
• For details on changing or deleting programmed e-mail addresses,
refer to the User’s Manual for the 7115F/7118F or the FK-117 Fax unit
for the 7115/7118.
IF-102.book Page 57 Friday, June 21, 2002 1:22 PM