User Guide
4 INITIAL SET Mode Settings
60
5. Enter the name of the group, and then
press the
[YES]
key.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• Text up to 20 characters long can be entered for the name of the
group.
6. By using the one-touch dial keys or
the speed dial numbers, or by entering
the dialing information directly, spec-
ify the recipients.
Tip
7. Press the
[ENTER]
key, and then spec-
ify another recipient.
• Repeat steps 6 and 7 until all recipi-
ents have been specified.
• A maximum of 50 different recipients can be specified as one group.
• While specifying recipients using group dialing, a one-touch dial key
programmed with a group can be specified. In that case, the number
of recipients programmed in the specified one-touch dial key (group
dial key) is added.
8. When you are finished specifying
recipients, press the
[START]
key.
• The settings are registered. To pro-
gram another group, repeat steps 4
through 8.
9. Press the
[NO]
key to finish program-
ming.
The “
FAX REGISTRATION
” menu
appears again.
• To cancel the current selection, press the [NO] key, and then
specify the correct recipient.
IF-102.fm Page 60 Tuesday, June 25, 2002 9:17 AM