User Guide

4 INITIAL SET Mode Settings
61
4.3 Specifying the “FORWARD” Function
You can set up the machine to forward any received faxes to other fax
machines and internet fax terminals (e-mails). You cannot forward any
received Internet faxes (e-mails).
To set the “FORWARD” function
1. Press the
[INITIAL SET]
key.
2. Press the key 8 times to select “
RX
OPERATION
”.
3. Press the
[6]
key from the keypad to
select “
FORWARD
”.
4. Using the and keys, select
“
ON
”, “
ON(PRINT)
” or “
OFF
”, and
then press the
[YES]
key.
• If “
ON
” or “
ON(PRINT)
” was
selected, a screen appears, allowing you to specify the forwarding
location. (Continue with step 5.)
• If “
OFF
” was selected, the “
RX OPERATION
” menu appears again.
Tip
5. Enter the e-mail address or fax number of the recipient by using the
one-touch dial keys or the speed dial numbers or by entering it directly.
Tip
6. Press the
[YES]
key.
The “
RX OPERATION
” menu appears again.
• If the “FORWARD” function is set to “ON(PRINT)”, this machine
prints the received document at the same time that it forwards it.
• If the e-mail address is entered directly, press the [MAIL] key after
entering the address. For details on entering text, refer to “1.5
Entering Text” (p. 9).
IF-102.book Page 61 Friday, June 21, 2002 1:22 PM