HOME IP-511 Print Controller Printer Read this manual before printing. Keep readily available for reference.
HOME Thank you very much for purchasing the IP-511. This INSTRUCTION MANUAL includes instructions for making prints, correct handling of the machine, and precautions for safety. Please read this manual before printing. In order to maintain a satisfactory printing performance, please keep this INSTRUCTION MANUAL readily available for reference.
HOME SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Corporation (Konica): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related explanatory written materials ("Documentation").
HOME CONTENTS CONTENTS ■ Introduction ........................................................................................................................... iv ● Package Contents ...................................................................................................................................... v ● System Requirements ............................................................................................................................... v ● About this Manual ................
HOME CONTENTS ■ ● Test Print Menu .....................................................................................................................................4-11 ● Controller Set ........................................................................................................................................4-12 ● Set Default ............................................................................................................................................. 4-14 ● PCL Setup .......
HOME Introduction ■ Introduction The Konica IP-511 is a print controller designed to be a built-in type server for the Konica 7155 / 7165 printer/ copier. It enables direct printing from Windows-compliant computers. It can also enable use of the copier as a network printer when an internal network interface card is used. For guidance in setting up the copier, configuring the settings for networks, and a description of the scanning features available, refer to the corresponding separate manuals.
HOME Introduction ● Package Contents The following items are supplied with the IP-511: • Notice Sheet • Interface Board • Board Cover • Board Protector Cover • TP screw (M3 x 6) • TP screw (M4 x 6) • User Software CD (Windows) • Printer Driver • Scanner Driver (compatible with TWAIN) • Network Connection Utilities • BOOTP • IP-P2P • MAP • NW Setup • UNIX • Adobe Acrobat Reader • INSTRUCTION MANUAL (this manual, Network Setup manual and Network Scanner manual) • Release Note (describes the latest infor
HOME Introduction ● About this Manual This manual is used only for the IP-511 Print Controller. This manual describes how to operate the IP-511 Print Controller when the Konica 7155 / 7165 Copier is used as a printer by connecting it to computers. This manual assumes you are familiar with the basic operation of Windows and Copier.
HOME Introduction ● Conventions Used in this Manual Notation of each product The following abbreviations are used in this manual: (1) IP-511 Print Controller: print controller (2) Konica 7155 / 7165 Printer/Copier: main body printer or copier (3) Internal Network Interface Card: network interface card (4) A printing system that combines the above (1), (2) and (3) products: printing system (5) Microsoft Windows 95: Windows 95 Microsoft Windows 98: Windows 98 Microsoft Windows Me: Windows Me Mi
HOME Introduction Notation of names shown on the screen are written within square brackets e.g., "click the [OK] button." Notation of folders Folders are referred to in upper-to-lower sequence. For example: Select the [Printer.inf] file in the "PCL\English\Win9X" folder of the User Software CD. Notation of the reference in this manual is written within quotation marks e.g., "Chapter 1 Overview." Indicates where to be referred to for information concerned e.g., " (p.1-1).
HOME Introduction ● Folder structure on the CD-ROM User Software CD Windows English Acroread NetUtil BOOTP IP-P2P IPX-P2P MAP NWSetup Unix Printer Win9x_Me WinNT_2000 Scanner Screenfonts UserGuide Others ip511prn_int_vxxx.pdf USA (Acrobat Reader 5.
HOME Chapter 1 Overview ■ Overview of the Print Controller .................................
HOME Chapter 1 Overview ■ Overview of the Print Controller ● Print Controller and Main Body Printer The print controller is designed to be used as the built-in type server of the main body printer/copier. The print controller can be used to connect the main body printer to computers or to a network on which the main body printer can function as a printer/network printer from applications on Windows 95/98/Me/NT/2000. The internal network interface card is required for connecting to a network.
HOME Chapter 1 Overview Copy Mode, Printer Mode and Scanner Mode The control panel of the main body printer can be used in any mode of the copy mode, the printer mode or the scanner mode. Even while the main body printer is printing or copying, the print controller can receive the next job, and while the print controller is receiving (or transmitting) a print job or a scan job, you can use the copy mode. Printer EKC Printer EKC is a feature to manage the number of prints on the copier.
HOME Chapter 1 Overview ● Print Data Flow Application Computer Browser HTML Print Commands Printer Driver Spooler Ethernet I/F Parallel I/F ( IEEE 1284 ) ( TCP/IP, IPX/SPX, AppleTalk ) Interface Print Controller Network Interface Card Parallel I/F ISA bus Input Buffer Hard Disk PDL Processing ( Rasterization ) / Interpreter Page Memory Main body printer PCI bus E-RDH memory Print Engine ( Print ) PDL command 1-4 Rasterized image data Printer status
HOME Chapter 1 Overview ● Hardware Configuration Basic Configuration Configuration of the print controller is as follows: • Architecture: IBM Compatible PC System • Processor: Intel Celeron 566 MHz • Memory: 64 MB standard / 192 MB max. (Optional) • Hard Drive: IDE compatible 2.0 GB min. ● Interface Do not use the parallel port with the Ethernet interface. Otherwise, a system error may occur.
HOME Chapter 1 Overview ● Printer Driver The print controller works according to the condition of the printer driver. The printer driver can be used on the following OS: • Windows 95 • Windows 98 • Windows Me • Windows NT4.0 • Windows 2000 Refer to "Chapter 2 Printer Driver Setup" for instructions regarding printer set up. (p.2-1) Refer to "Chapter 3 Printer Driver Functions" for detailed functions of the printer driver. (p.
HOME Chapter 1 Overview ● Memory Most of the print controller memory is used for rasterizing images (bitmap extracting process), font cache, form overlay or other functions. Only a small part of the memory is used for system operation. The basic memory setting of the print controller is 64 MB. The memory of the print controller can be expanded to 192 MB maximum. The more memory in the print controller, the more pages that can be rasterized while waiting for the previous job to print.
HOME Chapter 2 Printer Driver Setup ■ Installation of the Printer Driver ................................. 2-2 ■ Test Page Print ...........................................................
HOME Chapter 2 Printer Driver Setup ■ Installation of the Printer Driver To use the printing system, it is necessary to connect it to computers by way of the parallel interface or Ethernet interface and install the printer driver. The Printer driver is the program for the print controller which expands the OS functions to control the I/O of the printing system. ● Before Installation Models and Environment of Computers The printing system can be used with Windows-compliant computers.
HOME Chapter 2 Printer Driver Setup ● Installing to Windows 95/98/Me To install the printer driver to Windows 95/98/Me, perform the following steps. Please keep the "User Software CD" on hand since it is required to install the printer driver. 1. Turn on the computer and start Windows. Exit from all active Windows applications, if required. 2. Click the [Start] button of the task bar. Then, select [Settings] from the Start menu to click [Printers] from the sub-menu. The [Printers] window will open.
HOME Chapter 2 Printer Driver Setup When selecting [Network] When personal computers are connected to a network and you want to print via the network, select [Network]. In this case, it is necessary to complete the network settings on the network interface card and on the personal computers. For details, see your network administrator. For a [Network Printer], type the network path or queue name and click the [Next] button.
HOME Chapter 2 Printer Driver Setup 11. Be sure that in the list of [Printers], [Konica IP-511 PCL] is highlighted, then click the [Next] button. The next [Add Printer Wizard] window to assign a port will appear. 12. Select the port to which the printing system is connected and click the [Next] button. Select LPT port when the printing system is used as a local printer. The next [Add Printer Wizard] window to specify the printer name will appear.
HOME Chapter 2 Printer Driver Setup 13. Specify the printer name and click the [Next] button. Default: [Konica IP-511 PCL] The next [Add Printer Wizard] window to print the test page will appear. 14. Select whether you will print the print test or not. Select [Yes (recommended)] to print the test page, or select [No] not to perform it. 15. Click the [Finish] button. Necessary files will be copied from the "User Software CD" to complete the installation.
HOME Chapter 2 Printer Driver Setup ● Installing to Windows NT4.0/2000 The installation of the printer driver in Windows 2000 or Windows NT4.0 should be performed by a qualified system administrator or printer administrator. The process of installing the printer driver necessitates the User Software CD. Get it ready in advance. About Printer Administration under Windows 2000 or Windows NT4.0 Since Windows 2000 and Windows NT4.
HOME Chapter 2 Printer Driver Setup Installation using [Add Printer] 1. Turn on the computer and start Windows. Exit from all active Windows applications, if required. 2. 3. Log on as an administrator (or a user entitled to install a printer). Click the [Start] button of the task bar. Then, select [Settings] of the Start menu and click [Printers] from the sub-menu. The [Printers] window will open.
HOME Chapter 2 Printer Driver Setup Selecting [Network] When personal computers or workstations are connected to the network and you want to print via the network, select [Network printer] (Windows 2000) / [Network printer server] (Windows NT4.0). In this case, it is necessary to complete the network settings on the network interface card and on the personal computers. For a [Network printer] (Windows 2000) / [Network printer server] (Windows NT4.
HOME Chapter 2 Printer Driver Setup 12. Click the [OK] button. The next [Add Printer Wizard] window to select the manufacturer and model of the printer will appear. In the list of [Printers], [Konica IP-511PCL] will be highlighted. Windows NT4.0 13. Windows 2000 Click the [Next] button. The next [Add Printer Wizard] window to specify the printer name will appear. Windows NT4.0 14. Windows 2000 Specify the printer name and click the [Next] button.
HOME Chapter 2 Printer Driver Setup 15. Select [Do not share this printer] (Windows 2000) / [Not shared] (Windows NT4.0) or [Share as] (Windows 2000) / [Shared] (Windows NT4.0) by clicking. If you choose [Share as] (Windows 2000) / [Shared] (Windows NT4.0), specify the share name of the printer. Default: [Konica IP] 16. Click the [Next] button. The next [Add Printer Wizard] window to perform the print test will appear. Windows NT 17. Windows 2000 Select whether you will perform the print test or not.
HOME Chapter 2 Printer Driver Setup ● Uninstalling the Printer Driver (Windows 95/98/Me) To uninstall the printer driver, perform the following steps. 1. Turn on the computer and start Windows. Exit from all active Windows applications, if required. 2. Click the [Start] button of the task bar. Then, select [Settings] of the Start menu to click [Printers] from the sub-menu. The [Printers] window will open.
HOME Chapter 2 Printer Driver Setup ● Uninstalling the Printer Driver (Windows NT4.0) To uninstall the printer driver, perform the following steps. 1. Turn on the computer and start Windows. Exit from all active Windows applications, if required. 2. Click the [Start] button of the task bar. Then, select [Settings] of the Start menu to click [Printers] from the sub-menu. The [Printers] window will open. 3. Click the printer icon of the [Printers] window and press [Delete] key.
HOME Chapter 2 Printer Driver Setup 8. Search for file with [ip511] at the beginning of file name in the "\Winnt" folder and delete them. If you cannot delete file, log off once and log on again. 9. 10. Select the [Spooler] in the list of [Services] window, and click the [Start] button. Restart the computer. The printer driver will delete/uninstall.
HOME Chapter 2 Printer Driver Setup ● Uninstalling the Printer Driver (Windows 2000) To uninstall the printer driver, perform the following steps. 1. Turn on the computer and start Windows. Exit from all active Windows applications, if required. 2. Click the [Start] button of the task bar. Then, select [Settings] of the Start menu to click [Printers] from the sub-menu. The [Printers] window will open. 3. Click the printer icon of the [Printers] window and press [Delete] key.
HOME Chapter 2 Printer Driver Setup 8. Search for file with [ip511] at the beginning of file name in the "\Winnt" folder and delete them. If you cannot delete file, log off once and log on again. 9. 10. Select the [Print Spooler] in the list of [Services] window, and click the [Start] button. Restart the computer. The printer driver will delete/uninstall.
HOME Chapter 2 Printer Driver Setup ■ Test Page Print You can check whether the printer driver functions properly by performing a test page after the printer driver has been installed. To print the test page, perform the following steps. 1. Click the [Start] button of the task bar. Then, select [Settings] from the Start menu and click [Printers] in the sub menu. The [Printers] window will open.
HOME Chapter 2 Printer Driver Setup Screen Fonts The User Software CD includes [Screen Fonts], or TrueType fonts other than fonts which Windows comes standard with. With these fonts installed in your system, you can go with a WYSIWYG approach with both printer fonts and TrueType fonts. The use of screen fonts may also be conductive to increase in print performance. To install the screen fonts (Windows 95/98/Me/NT/2000) 1. 2. 3. From the task bar, select [Start]-[Settings]-[Control Panel].
HOME Chapter 3 Printer Driver Functions ■ Printer Driver Functions .............................................
HOME Chapter 3 Printer Driver Functions ■ Printer Driver Functions Printer driver is the program which is installed in Windows-compliant computers for using and setting up the printing system. It expands the OS functions to control the I/O of the printing system. This chapter fully describes the various functions of the printer driver. ● Compliant OS The printer driver can be used on the following OS: • Windows 95 • Windows 98 • Windows Me • Windows NT4.
HOME Chapter 3 Printer Driver Functions ● Properties You have two ways of selecting or changing settings through the printer driver. 1. The first way is by going through [Start] - [Settings] - [Printers] - [Konica IP- 511 PCL] - [Properties]. Or, you can select [Control Panel] - [Printers]. If you are using Windows NT4.0, [Start] - [Settings] - [Printers] - [Konica IP- 511 PCL] - [Konica IP- 511 PCL Default] is also available excluding [Setup] and [Options].
HOME Chapter 3 Printer Driver Functions Windows 95/98/Me 1. Click [Start]-[Settings]-[Printers], right-click the [Konica IP-511 PCL] icon, and then click [Properties]. The following tabs will appear: [General], [Details], [Color Management], [Sharing], [Paper], [Cover], [Graphics], [Options], [Watermarks], [Overlay], [Setup] and [About]. [OK] When the [OK] button is clicked, settings are saved and the properties screen closes.
HOME Chapter 3 Printer Driver Functions Windows NT4.0/2000 1. Click [Start]-[Settings]-[Printers], right-click the [Konica IP-511 PCL] icon, and then click [Properties]. The following tabs will appear, then settings of the printer ports and options should be made: [General], [Advanced], [Ports], [Scheduling], [Sharing], [Security], [Setup] and [About]. 2. Click [Start]-[Settings]-[Printers], right-click the [Konica IP-511 PCL] icon, and then click [Document Defaults] or [Printing Preferences].
HOME Chapter 3 Printer Driver Functions Setting details of each tab [General] tab Enables printing a test page. [Details] tab Performs settings related to ports, drivers, time-out and spooling. [Sharing] tab Performs share settings of a printer. [Paper] tab Performs settings related to Copies, Collate, Orientation, Paper Size, Paper Source, Duplex, Output Tray, Media Type, Password Print and Features to use the main body printer functions.
HOME Chapter 3 Printer Driver Functions ● Function List The following list summarizes functions (Setting Items) which can be set by using the printer driver of the printing system. Some of the interfaces to tabs and others are displayed differently by OSs. Also, among the tabs there are some that are not shown depending on settings. Refer to "Description of Functions" for details of each function (Setting Items). (p.
HOME Chapter 3 Printer Driver Functions Classification Paper tab (Features) Graphics tab 3-8 Setting Items Set Value Description 95/98/Me NT4.0/ 2000 Duplex None Flip on long edge Flip on short edge This function is used to set the mode of Duplex printing. o o Output Tray Default Sub Tray Main Tray This function is used to specify the output tray. o o Password Print Off/On This function is used to set the password print .
HOME Chapter 3 Printer Driver Functions Classification Setting Items Options tab Layout - Pages per sheet Set Value 1 / 2 / 4 / 6 / 9 / 16 Layout - Scaling 10 to 400 Watermarks tab Description 95/98/Me NT4.0/ 2000 This function is used to print more than one page of a document on one sheet of paper. o o This function is used to specify the enlargement or reduction rate of image in percentage.
HOME Chapter 3 Printer Driver Functions Classification Watermarks tab Overlay tab 3-10 Setting Items Set Value Description 95/98/Me NT4.0/ 2000 Font - Name Arial Arial Black Courier New Symbol Tahoma Times New Roman Wingdings, etc. This function is used to specify the font of the selected watermark. (A list of the fonts installed in the PC is displayed.) o o Font - Color Black Dark Grey Light Grey White This function is used to specify the color of the selected watermark.
HOME Chapter 3 Printer Driver Functions Classification Setting Items Overlay tab Symbol - Select Bitmap Setup tab Set Value Description 95/98/Me NT4.0/ 2000 - This function is used to register Bitmap image for overlay. o o Shade - Color Black This function is used to specify color for a bitmap image. Only Black is selectable. o o Shade Darkness 0 to 100 This function is used to specify Darkness of a bitmap image for overlay.
HOME Chapter 3 Printer Driver Functions Classification Cover tab About tab 3-12 Setting Items Set Value Description 95/98/Me NT4.0/ 2000 Front Cover Off/On Blank Printed This function is used when front covers are used. o o Front Cover Tray Bypass tray Tray 1 Tray 2 Tray 3 Tray 4 (LCT) This function is used to select a paper source used for front covers. o o Back Cover Off/On Blank Printed This function is used when back covers are used.
HOME Chapter 3 Printer Driver Functions ● Description of Functions Functions (setting items) that can be set with the Printer Driver are summarized in the tab order. Refer to "Properties" for how to indicate each tab in the properties. (p.3-3) Some of the interfaces to tabs and others are displayed differently by OSs. Also, there are some tabs that are not shown, depending on settings.
HOME Chapter 3 Printer Driver Functions [Paper] Tab Copies This function is used to specify the number of copies to be printed. Click the [▲] or [▼] button or directly enter the number of copies from the keyboard (1-9999). Default is 1. Collate This function is used to specify how the copier outputs multiple pages. When [Collate] is checked (on, Default), after one copy of all pages has been printed, the second copy, the third copy, ..... are printed.
HOME Chapter 3 Printer Driver Functions Paper Size You can select a paper size from the list shown by clicking the [▼] button. Default is [A4]. Paper size to be selected 5.5" x 8.5" 8.5" x 11" 8.5" x 14" 11" x 17" A3 - 297 x 420 mm A4 - 210 x 297 mm A5 - 148 x 210 mm A6 - 105 x 148 mm B4 - 250 x 354 mm B5 - 182 x 257 mm B6 - 128 x 182 mm F4 - 8.0 x 13 inches 8K - 267 x 390 mm 16K - 195 x 267 mm 5.5" x 8.5" W 8.
HOME Chapter 3 Printer Driver Functions Media Type Select the paper type from the list shown by clicking the [▼] button. Default is [Plain paper]. The settings you can select are as follows: [Plain paper], [Thin paper], [Thick paper], [Tab sheet], [2nd Original], [OHP (Transparency)], [OHP-Interleave (Blank)], [OHP-Interleave (Print)] or [User defined type]. The settings except [OHP-Interleave (Blank)] and [OHP-Interleave (Print)] are used for the paper type set on [Bypass tray].
HOME Chapter 3 Printer Driver Functions Duplex Select the Duplex setting from the list shown by clicking the [▼] button. The settings you can select are as follows: [None], [Flip on long edge] or [Flip on short edge] Default is [None]. Flip on long edge Prints paper so that heads of both sides become upward. Flip on short edge Prints paper so that the head of the front becomes the foot of the back.
HOME Chapter 3 Printer Driver Functions Password Print When [Password Print] is checked, you can use password print (confidential output) function to print the confidential documentation. In this method, both settings on computer and the operation from the LCD touch panel are used. Default is [Off]. Refer to "Chapter 4 Password Print (Confidential Output)" for password print procedure. (p.4-22) Settings Open the [Password Print Settings] dialog for password setting.
HOME Chapter 3 Printer Driver Functions Offset Off / On Staple None / Single Left / Double Top / Double Left / Single Right / Double Right Combination None / Booklet / Booklet-Right / 2-in-1 / 2-in-1 Repeat Punch Off / Left / Top / Right Fold & Stitch None / Fold Only / Fold & Stitch / DM-Fold Wait Mode None / Wait / Wait with Proof Image Shift Off / On Output Order FaceDown / FaceUp Features - Offset [On] offsets each copied set upon exit.
HOME Chapter 3 Printer Driver Functions Features - Staple [Single-Left], [Double Top] or [Double Left] makes staple each set of copies and output to the tray of the finisher.
HOME Chapter 3 Printer Driver Functions Features - Combination The settings you can select are as follows: [None], [Booklet], [Booklet-Right], [2-in-1] or [2-in-1 Repeat] Default is [None]. [Booklet] prints paper so that booklets are made when it is folded into two. 7 8 1 2 7 6 1 8 3 2 A4/B5/A5 5 A3/B4/A4 4 A3/B4/A4 [2-in-1] setting is, available which prints out two-page data on one sheet of paper. Two page data is printed out on a sheet of paper twice as large as the selected size of paper.
HOME Chapter 3 Printer Driver Functions [Booklet] or [Booklet-Right] can not be performed in the following cases: • When settings other than [None] are selected in [Features] - [Staple] • When [Back Cover] and/or [Sheet Insertion] are/is selected in [Cover] tab • When [OHP (Transparency)], [OHP-Interleave (Blank)], [OHP-Interleave (Print)] or [Tab sheet] is selected in [Media Type] [2-in-1] or [2-in-1 Repeat] can not be performed in the following cases: • When [Back Cover], [Front Cover] and/or [Sheet Ins
HOME Chapter 3 Printer Driver Functions Features - Punch [Left], [Top] punches each set of copies and outputs to the tray of the finisher.
HOME Chapter 3 Printer Driver Functions With target papers set in multiple trays, the [Punch] feature can be set from the driver, but there are occasions where papers are output without being punched depending on the settings of the copier. Causative Setting Examples: • [Front Cover], [Back Cover] or [Sheet Insertion] is selected from the [Cover] tab. • [Booklet] or [Booklet-Right] is selected from [Combination] on the [Paper] tab. • Multiple paper sizes are specified from within an application.
HOME Chapter 3 Printer Driver Functions Features - Fold & Stitch You can make the following finish settings: [Fold Only] foldes each set of copies and outputs to the tray of the finisher. [Fold & Stitch] foldes and stitches each set of copies and outputs to the tray of the finisher. [DM-Fold] lets output sheets be folded into three equal, smaller folds and be output to the tray of the finisher.
HOME Chapter 3 Printer Driver Functions [Cover] Tab Front Cover You can select this setting when using a different paper for the front covers from that of the body of the booklet (colored, for example). [Front Cover] inserts a sheet to the top of each set of copies as a Front cover. When [Front Cover] is checked, you can select [Printed] or [Blank]. [None], [Printed], [Blank] Default is [None] • When [Blank] is selected, nothing is printed on the front cover.
HOME Chapter 3 Printer Driver Functions Back Cover You can select this setting when using a different paper for the back covers from that of the body of the booklet (colored, for example). [Back Cover] inserts a sheet to the top of each set of copies as a Back cover. When [Back Cover] is checked, you can select [Printed] or [Blank]. [None], [Printed] or [Blank] Default is [None]. • When [Blank] is selected, nothing is printed on the back cover.
HOME Chapter 3 Printer Driver Functions [Sheet Insertion] cannot be performed in the following cases: • When [Collate] is not selected in [Copies] • When settings other than [None] are selected in [Features]-[Combination] • When [OHP-Interleave (Blank)], [OHP-Interleave (Print)] is selected in [Media Type] Sheet Insertion - Pages When [Sheet Insertion] is checked, you can enter the number of page in the [Pages] box. When [Sheet Insertion] is not selected, [Pages] can not be performed.
HOME Chapter 3 Printer Driver Functions PI Cover Sheet [PI Cover Sheet] inserts a sheet from PI tray as a Front cover and/or a Back cover.
HOME Chapter 3 Printer Driver Functions [Graphics] Tab Halftoning You can select [Patterned Grays], [Solid Black and White] or [Diffused Grays] by clicking the radio button. [Patterned Grays] prints image by an ordered dither algorithm. [Solid Black and White] prints without dithering and gray tone. [Diffused Grays] prints image with error diffusion. A sample image will be displayed according to your selection.
HOME Chapter 3 Printer Driver Functions [Options] Tab Layout - Pages per sheet You can select the number of document pages to be printed on one piece of paper. Select [1], [2], [4], [6], [9] or [16] from the list shown by clicking the [▼] button. Default for [Pages per sheet] is [1]. [1] [9] [2] [4] [6] [16] When the pages per sheet print is selected, an automatic reduction is activated so that all information is printed within the printable area on the page.
HOME Chapter 3 Printer Driver Functions Layout - Scaling Select the enlargement or reduction rate of image in 1% increments by entering the value from 10 to 100 into the text box. Default is [100]%. TrueType options Select [Outline soft fonts], [Bitmap soft fonts] or [Rasters] by clicking the radio button. [Outline soft fonts] prints documents using a TrueType font which downloads from your computer using Outline data format.
HOME Chapter 3 Printer Driver Functions [Chapter] is off; [Duplex] - [Flip on short edge] [Duplex] - [Flip on long edge] end of chapter 1'st page of a chapter The maximum number of pages you can specify to chapter is 30. You can specify the numbers using comma ",". The same number can not be specified. You can specify 1 to 999 as follows; e.g.
HOME Chapter 3 Printer Driver Functions HD-105 Image Storage When [HD-105 Image Storage] is checked, you can select [Store] or [Store and Print] to store the printing image. If [HD-105] is not available, [HD-105 Image Storage] can not be performed. [Store] saves the printing image to the Hard Disk of the printer. [Store and Print] prints the printing image and saves it to the Hard Disk of the printer. Refer to "Chapter 4 Print Job-Job Combination" for printing of stored images. (p.
HOME Chapter 3 Printer Driver Functions Job Combination You can combine and print the data held in the print controller's hard disk as a result of the [HD-105 Image Storage] settings on the printer driver and/or using the copier in store mode under the following conditions: Copier Printer note [P-JOB] is not selected - [P-JOB] can not be performed on printer [Sheet/Cover Insertion] is not selected [Sheet Insertion] is not selected - [Chapter] is not selected [Chapter] is not selected - [Combinat
HOME Chapter 3 Printer Driver Functions [Watermarks] Tab Watermark - Text Select the text to be printed as a watermark from the list shown by clicking the [▼] button. You can select a watermark from [CONFIDENTIAL], [COPY], [DRAFT], [FILE COPY], [FINAL], [PROOF] and [TOP SECRET]. Default watermarks that are set up during driver installation can be modified and customized. If you want to create new text, click the [New] button.
HOME Chapter 3 Printer Driver Functions Font - Name You can select only one font per watermark from the list shown by clicking the [▼] button. When you change the font, the preview window will refresh itself by showing the effect of the new font on the existing text sample displayed there. The default font name is [Arial]. Font - Color Select the color of watermarks. Select [Black], [Dark Gray], [Light Gray], or [White] from the color palette shown, by clicking the [▼] button.
HOME Chapter 3 Printer Driver Functions Adjustment Select [Move] or [Rotate] by clicking the radio button. When [Move] is selected, you can move the watermark as you position it manually by clicking on the page sample and "dragging" the mark around. When [Rotate] is selected, you can rotate the watermark as you position it manually by clicking on the page sample and "dragging" the mark around.
HOME Chapter 3 Printer Driver Functions [Overlay] Tab Symbol - File You can select a bitmap file to use from the list shown by clicking the [▼] button. The bitmap files selected before will appear in the list in order of using (the top of the list is a most recently used file). If you've not selected any file, this will say [None]. Select a file from this list or click the [Select bitmap] button to navigate through your system's hard disk to locate a bitmap file to use.
HOME Chapter 3 Printer Driver Functions Show layout / Show single page When the [Show layout] button is clicked, you can preview how your [pages per sheet] options selected in [Options] tab will look with the current overlay settings. The [Show layout] button will change to the [Show single page] button by clicking it. When the [Show single page] button is clicked, you can preview how the single page will look with the current overlay settings.
HOME Chapter 3 Printer Driver Functions [Setup] Tab Available options This list shows available printer options. If you purchase this optional accessory you can make the printer driver aware of it by selecting it from this list and clicking the [Add] button. The selected option's label will move into the list of [Installed options]. Installed options This list displays the selected options from the list of [Available options].
HOME Chapter 3 Printer Driver Functions [About] Tab The [About] tab shows some system information and the printer driver version.
HOME Chapter 4 Control Panel Setup ■ Control Panel ............................................................... 4-2 ■ Configuration of Printer Setting Menu .................... 4-10 ■ Functions of the Printer Setting ............................... 4-11 ■ Print Job .....................................................................
HOME Chapter 4 Control Panel Setup ■ Control Panel You can set up the printing system from the control panel of the main body printer (copier). This chapter describes the basic operation of the control panel and the setup menu as well as the functions of the printing system setup. Refer to the operating manual of the copier for other functions and screens of the control panel. ● Names and Functions of the Control Panel The control panel has the following names and functions.
HOME Chapter 4 Control Panel Setup 10. [C] (CLEAR QTY.) Allows resetting of print quantity. 11. [P] (COUNTER) Displays the Counter Screen or accesses programming modes for setting special functions. 12. HELP Displays a screen with help for the currently selected function. 13. AUTO RESET Restores copier to automatic mode settings or to key operator settings. 14. JOB MEMORY Displays screens for selecting job store/job recall functions.
HOME Chapter 4 Control Panel Setup ● LCD Touch Screen The touch screen is an LCD (liquid crystal display) that displays interactive screens with touch sensitive keys for making copy/print job selections. Selections are highlighted when touched. The screens also work with the conventional control panel keys. The touch screen of the control panel is covered with glass. Do not drop heavy items on the glass, or put excess weight or pressure on it; otherwise the glass may break or become scratched.
HOME Chapter 4 Control Panel Setup The printing system is ready to receive the print data from your computer. PRINT The print controller is currently printing. The print data rasterized in the print controller is now being transferred to the E-RDH memory in the main body printer. ERROR The print controller generated an error message. WAIT The main body printer is in warm-up mode. INITIALIZING The print controller is in initialization process.
HOME Chapter 4 Control Panel Setup ● Job Status Screen When you touch the [STATUS] key on the Basic Screen, the [Job Status Screen] will be displayed and you can confirm the status of a print job. Contents of the Job Status Screen are as follows: NO. Displays the No. (1-99) for each job (print/copy/scan) assigned to the machine.
HOME Chapter 4 Control Panel Setup MINUTE(s) TO GO Displays the time (in minutes) required for completing the job. 1 to 999 Exceeding 999 minutes: 999 Shorter than 1 minute: <1 Other The following message will be displayed on the bar when the reserved job does not exist.
HOME Chapter 4 Control Panel Setup ● Printer Mode Basic Screen When the printing system starts properly, the Printer Mode Basic Screen (main menu screen) is displayed on the LCD by pressing the [MODE] button. When the [MODE] button is pressed again, the LCD is changed to the Copy Mode Basic Screen, and the normal copy settings becomes available. The following settings can be selected from the Printer Mode Basic Screen. [Test Print Menu] Display the Test Print Setup Screen.
HOME Chapter 4 Control Panel Setup Procedures of the Printer Setting You can select or change settings from the LCD by touching a key on the LCD touch screen. Item Selection and Appearance of Selected Items Various settings are performed by touching a icon of the item you would like to select on the LCD. Currently selected items are displayed with reverse color. As a result of selecting [PCL Demo Page] of [Test Print Menu] As a result of selecting [Config.
HOME Chapter 4 Control Panel Setup ■ Configuration of Printer Setting Menu Test Print Menu PCL Demo Page PCL Font List Config. Data NIC Config. Controller Set Banner Page On Banner Page Tray Auto Tray default Off default Tray 3 Tray 4 Tray 1 Bypass Tray Tray 2 Spool Job Time Out On default Off 5 20 60 180 10 30 default 240 120 300 15 Copier Time Out 15 60 90 30 default ScanDataAutoDel.
HOME Chapter 4 Control Panel Setup ■ Functions of the Printer Setting ● Test Print Menu Select [Test Print Menu] from the Printer Mode Basic Screen to display the Test Print Setup Screen. Setting items are as follows: [PCL Demo Page] Select [PCL Demo Page] to print the PCL Demo Page immediately. [PCL Font List] Select [PCL Font List] to print the PCL Font List immediately. [Config. Data] Select [Config. Data] to print the System Configuration data immediately. Items of the Config.
HOME Chapter 4 Control Panel Setup ● Controller Set To enable the settings, it is necessary to turn OFF/ON the main body printer. Select [Controller Set] on the Printer Mode Basic Screen to display the Print Controller Setup Screen. Setting items are as follows: [Banner Page] Select [Banner Page] to set the Banner Page. Setting items are as follows: • On : prints the Banner Page prior to the set of print jobs • Off : (Default) [Banner Page Tray] Select [Banner Page Tray] to set the tray for Banner Page.
HOME Chapter 4 Control Panel Setup [Spool] Select [Spool] to set the Spool condition. Setting items are as follows: • On : spool waiting print job queue within HDD • Off : interpreter within the print controller processes the print job without spooling (Default) [Job Time Out] Select [Job Time Out] to set the Job Timeout value. When it reaches the job timeout value without receiving print job data or without any communication between the printing system and your computer, the printing system ends the job.
HOME Chapter 4 Control Panel Setup [ScanDataAutoDel.] Select [Scan Data AutoDel.] to set the Scan Data AutoDel. condition. Setting values are as follows: • Off / 12 hour / 24 hour (Default) / 2 days / 4 days / 6 days / 8 days / 10 days • Off: The scan data held in the print controller's hard disk is not deleted automatically ● Set Default It is not necessary to turn OFF/ON the main body printer. Select [Set Default] on the Printer Mode Basic Screen to display the Print Job Setup Screen.
HOME Chapter 4 Control Panel Setup [Duplex] Select [Duplex] to set the default Duplex. Setting items are as follows: • Off : set the Duplex off (Default) • Long Edge : set the Long Edge Duplex • Short Edge : set the Short Edge Duplex [Orientation] Select [Orientation] to set the default Orientation.
HOME Chapter 4 Control Panel Setup ● PCL Setup It is not necessary to turn OFF/ON the main body printer. Select [PCL Setup] from the Printer Mode Basic Screen to display the PCL Setup Screen. Setting items are as follows: [CR/LF Mapping] Select [CR/LF Mapping] to set the CR/LF Mapping. Setting items are as follows: • CR/LF : replace line ending LF code to CR/LF • CR : does not convert line ending code (Default) [Input Tray] Select [Input Tray] to set the Input Tray.
HOME Chapter 4 Control Panel Setup ■ Print Job ● Cancel You can stop the job reserved or the job in progress. If the job is still on your computer first, delete the job from your computer and press the [STOP / CLEAR] key on the control panel. You cannot stop the remaining job completely by only pressing the [STOP / CLEAR] key. The [STOP / CLEAR] key can clear the memory of the print controller and E-RDH in the main body printer but will not clear the remaining jobs on your computer.
HOME Chapter 4 Control Panel Setup ● Check You can check the current job settings and see how the printed job will look using the Wait Mode on the printer driver screen to print out only one set of the print job before printing out multiple sets. How to check the job - Wait Mode - Proof: This method prints one set of the print job for checking after checking the settings on the control panel. On your computer: 1. 2. 3.
HOME Chapter 4 Control Panel Setup 7. 8. 9. Touch the [PROOF PRINT] to print one copied set for proofreading. Touch the [Exit] to return to the print mode basic screen. Press [START] to resume the rest of the print job. When you change the settings, press [STOP] to cancel the print job, and change the settings on the printer properties on your computer. How to check the job - Wait Mode - Wait: This method is used only for confirming the settings on the control panel without printing.
HOME Chapter 4 Control Panel Setup ● Interrupt / Reserve The Interrupt mode can be used to interrupt the current printing operation to perform a copying job. The Interrupt mode can be selected when the engine is receiving print data or when printing is already in progress. Under some conditions of printing or Finisher settings, the Interrupt mode cannot be used. How to interrupt 1. 2. 3. 4. Press the [INTERRUPT] key when the print job is in progress.
HOME Chapter 4 Control Panel Setup ● Forced Output When the tray runs out of preset size papers, or when the tray does not contain papers whose size meets the demand from the printer driver, the printing system displays a message prompting the user to load additional papers. The process by which the user selects, when the prompt appears, a different size of papers on the operation panel and lets the print work continue on these papers, is referred to as "Forced Output." Forced Output Procedure 1. 2. 3.
HOME Chapter 4 Control Panel Setup ● Password Print (Confidential Output) A Confidential Output feature enables you to password protect specific print jobs. The printing process starts only when you enter a password on the control panel of the main body printer; a password you set up when transferring a print job from your computer. This feature allows you to manage confidential documents without worrying about someone else having access to them.
HOME Chapter 4 Control Panel Setup On the control panel: 7. 8. Press the [MODE] button to display the print mode basic screen and display [Password Print] touch key. Enter your user ID using the numeric keys, and touch the [OK] key. The ID is displayed with the [Password] key highlighted. 9. Enter your password using the numeric, CAPITAL or SMALL keys, and touch the [OK] key. If no capital letters are displayed, you can touch the [CAPITAL] key to display them.
HOME Chapter 4 Control Panel Setup 10. Select the print job you need, and touch the [Print] key. The print process starts. You can specify multiple jobs to print out at one time. Deleting Password Print Jobs You can delete print jobs once set for Password Print (Confidential Output). To do this, in the window appearing in step 10 under the heading of "Password Print (Confidential Output) Procedures", select the print job you want to delete, and touch the [Delete] key.
HOME Chapter 4 Control Panel Setup ● Job Combination You can combine and print the data held in the print controller's hard disk as a result of the [HD-105 Image Storage] settings on the printer driver and/or using the Copier in store mode. With some application software, the setting for the printer driver also is saved.
HOME Chapter 5 Printer EKC ■ Overview of the Printer EKC .......................................
HOME Chapter 5 Printer EKC ■ Overview of the Printer EKC Printer EKC is the feature use to manage the number of prints on the copier. Setting the Printer EKC feature means that, provided you enter a password previously established on the printer to request a print job, the copier counts the printouts on the EKC counter to know when a preset limit is hit, and rejects print request from clients without a password.
HOME Chapter 5 Printer EKC You must enter the same password (8 digits or less) in the User ID text box that you set up on the copier for Printer EKC. If you do not enter the correct password or if you leave the User ID text box blank, the print job is not performed and is registered as non complete job. When in doubt about the password for Printer EKC, ask your system administrator. 3. Click [OK] to close the Properties and start the printing process.
HOME Appendix A Troubleshooting ■ Basic Troubleshooting .............................. Appendix A-2 ■ General Problems of Printing ................... Appendix A-3 ■ Troubles Concerning the Scanner ........... Appendix A-6 ■ Checking on Non complete job ................
HOME Appendix A Troubleshooting ■ Basic Troubleshooting This section describes how to troubleshoot. If problems are not resolved by using the following countermeasures, contact your Konica service representative. First check the following ordinary causes of abnormalities: 1. 2. 3. 4. Check the power of the main body printer (copier), computers and cable connections. Check the LCD touch screen of the main body printer to find information concerning the current trouble.
HOME Appendix A Troubleshooting ■ General Problems of Printing ● The Print Controller does not respond to the Print command. 1. Check that the printing system is selected as a current printer. It is a requirement that the printing system is selected as a present printer on Windows before printing. 2. 3. Check that the power switch of the copier is turned on. Print the Test Page from Windows.
HOME Appendix A Troubleshooting ● You cannot print the test print. 1. Check the LCD of the main body printer control panel. When "Ready to copy" is displayed on the LCD, go to Step 3. When a diagnostic message or an error message is displayed on the LCD, refer to the operating manual of the main body printer (copier). When the LCD is blank, go to Step 2. 2. Press the POWER SAVER ON/OFF on the control panel.
HOME Appendix A Troubleshooting ● HD Full Hard-disk full occurs when 1% of total disk capacity is used by the print/scan jobs. If the disk capacity is 2 GB, the HD Full is 20 MB free space. Under the HD Full condition, the following message is displayed on the front panel of the main body printer. Printer HD Full Please free HD space 1. Remove the scan job in the HD on network computer. Refer to "Network Scanner " in your INSTRUCTION MANUAL for deletion the scanned data. 2. 3.
HOME Appendix A Troubleshooting ■ Troubles Concerning the Scanner ● Cannot connect to the scanner When an error dialog appears when attempting to access the scanner, perform the following checks: 1. Check whether the correct IP address of the scanner has been entered. If the entered IP address is not correct, enter the correct one. If the entered IP address is correct, go on to step 2. 2. From the DOS prompt run a ping test through the destination host to the IP address of the scanner.
HOME Appendix A Troubleshooting ■ Checking on Non complete job If print jobs are not output, you can check them on the Non complete Job List screen. To get the Non complete Job List screen to appear: 1. Press the [STATUS] key on the printer mode base screen to get the Job Status Screen to appear, and then press the [NON COMPLETE JOB LIST] key. The Non complete Job List screen will appear. You can scroll the list up/down with the [s] [t] keys.
HOME Appendix B Product Specifications ■ Product Specifications..............................
HOME Appendix B Product Specifications ■ Product Specifications Type: Built-in box type for the Konica 7155 / 7165 Printer/Copier Paper: 5.5X8.5 / 8.5x11 / 8.5x14 / 11x17 / A3 / A4 / A5 / A6 / B4 / B5 / B6 / F4 / 8K / 16K / 5.5X8.5W / 8.
HOME Appendix B Product Specifications Compliant OS: Windows 95/98/Me Windows NT 4.0 (NT Service Pack 3 or more) Windows 2000 Mac OS 7.1 or more (optional PS3 kit required) Printer Driver: Printer driver for Windows 95/98/Me/NT 4.
HOME Appendix C Font List ■ Internal Font List .......................................
HOME Appendix C Font List ■ Internal Font List Appendix C-2
HOME Appendix C Font List Appendix C-3
HOME Appendix C Font List Appendix C-4
HOME Index Index A Add Printer ........................................................ 2-8 Available options ............................................. 3-41 B Back Cover ..................................................... 3-27 C Chapter ........................................................... 3-32 Collate ............................................................. 3-14 Combination .................................................... 3-21 Compliant OS ...........................................
HOME MANUFACTURER ● KONICA CORPORATION ● TOKYO JAPAN 2001.
