- Konica Print Controller User's Manualn

6. Printing

6.7 Effecting Staple

The Staple function can be used only when the copier is equipped with the Finisher

FS-231 or FS-135.

1. Select the “Setup” tab.

2. Clicking “Detail of Output Setting” will open a dialog box for setting details.

Make the following settings in the “Staple” column.

• If FS-231 is mounted:

OFF, Corner, Top Side 2 Points, Left Side 2 Points, Auto 2 Points

• If FS-135 is mounted:

OFF, Corner

NOTE

• When the FS-135 is mounted, stapling can be made up to 30 sheets of paper.

• When the FS-231 is mounted, stapling can be made up to 50 sheets of A4

lengthwise (Letter lengthwise) paper or 25 sheets of B4 lengthwise (Legal

lengthwise) paper.