Digital Still Camera Thank you for your purchase. For the correct usage of this product, please read this User's Manual and warranty card carefully and keep them in a safe place for future reference. Before accepting the warranty card, please make sure that the date of purchase and the dealer's details have been completed.
Table Of Contents Table Of Contents Getting Started ---------------------------------------------------------4 Important Safety Precautions ------------------------------------- 5-9 Introduction--------------------------------------------------------10-14 Accessories Included ---------------------------------------------------10 External View -----------------------------------------------------------11 Mode Dial (Working Modes) ------------------------------------------- 12 Focus Range -------------------
Important Safety Precautions Getting Started Please be sure to read this manual before use. Test shooting Be sure to take some test shots before taking important pictures (such as business or weddings) to make sure that the camera is working properly. Results are not guaranteed In the unlikely event that a problem arises in shooting or reproducing pictures due to the camera or memory card used, please understand that no compensation can be made.
Important Safety Precautions Important Safety Precautions Warning Warning Should any of the following occur, stop using the product immediately. Remove the batteries from the unit and disconnect the AC adapter. If using the AC adapter, disconnect the power plug from the wall outlet. Consult the dealer from whom you bought the product for further assistance. Continued use of the product may result in fire or electrical shock.
Important Safety Precautions Important Safety Precautions Caution Caution When taking a picture, wipe off the flash surface and be careful not to cover the flash. If the flash surface is dirty or you take a shot with the flash covered, it is possible for the flash surface quality or color to change, due to the high temperature of the flash. Check that the polarity is correct when inserting batteries.
Introduction Introduction Accessories Included Safety Notes Digital Camera Camera Driver & Ulead Software & User Manual External View Safety Notes 2 x AA Batteries Top Shutter Button Mode Dial View Finder Camera Pouch Wrist Strap Quick Start Guide Front Flash Quick Start Guide Self-timer LED KO NICA L AN S USB Connector DC In Connector USB Cable Lens Focus Switch Bottom Battery/Memory Card Cover 10 Tripod Socket 11
Introduction Introduction TFT LCD Monitor Icon Definition Safety Notes Back View Finder Power Switch LED Indicator Menu Button Strap Eyelet TFT LCD Monitor Battery status ( ) Battery full ( ) Battery half drained ( ) Battery drained Macro or portrait Flash mode ( )Auto flash ( )Auto flash with red-eye reduction ( )Night scene ( )Fill-in flash ( )Flash off Digital zoom Up ( )Direction Button Down ( )Direction Button Left ( )Direction Button Right ( )Direction Button TFT LCD Button White balance (
Introduction Preparation For Taking Pictures Icon Index Safety Notes How to Switch On Or Off The Camera Safety Notes To switch on the camera, slide the Power Switch to the side and hold it for 1 second. To switch off the camera, slide the Power Switch to the side and hold it for 1 second again. Working Mode Focus Range Loading the Batteries Flash Modes X4 Digital Zoom This camera is using 2 x AA batteries. 1. Make sure the camera is switched off. 2. Open the Battery / Memory Card Cover. 3.
Preparation For Taking Pictures Preparation For Taking Pictures Using An AC Adapter(Opticnal) Note 1. Do not change the battery with wet hands, as there is a danger of electric shock. 2. Warning When you continue using the camera for a long time, the batteries become hot. Contact with the batteries can lead to burns. Never open the battery/card cover while the camera is accessing the card or processing images.
Preparation For Taking Pictures Inserting An SD Card 1. Switch off the camera. 2. Open the Battery / Memory Card Cover. 3. Insert the SD card into the card slot and press it down until you hear a click sound. 4. Close the Battery / Memory Card Cover. Note If a new SD card is used, you'll have to format it first. Please refer to page 18 for details. Note This camera is equipped with a built-in flash memory. The image(s) can be stored either in the built-in memory or in a memory card.
Preparation For Taking Pictures Important Setting Up Functions Before Taking Pictures Under Shooting Mode ( In the event of malfunction or damage, it is possible that data may be lost. Konica can not accept responsibility in any way for such data loss. Always back-up important data. When using SD Memory Cards on a PC, do not change the attributes(read-only, etc.) of the files (image data) on the card. Doing so may prevent the camera from working properly when deleting images, etc.
Setting Up Functions Before Taking Pictures Setting Up Self-timer (Preset : off) To activate the self-timer or cancel the self-timer, press Up ( ) Direction Button. Self-timer will be activated when the Shutter Button is pressed. This function can delay the shutter from release for 10 seconds. Self-timer is automatically canceled after the shutter is released. Setting Up Digital Zoom This camera is equipped with 4X digital zoom (Continuously). To activate digital zoom please press Right Direction ( )Button.
Setting Up Functions Before Taking Pictures Setting Up White Balance (Preset : Auto White Balance) ) and press Menu Please set the Mode Dial at Shooting Mode ( Button to enter "Still Image" menu table. 1. Select "White Balance" 2. Five modes can be selected as follows: ( AUTO) Auto White Balance: The camera will adjust the white balance by itself. It is suggested that the user to stay with this mode unless the light environment is very different from normal. ( ) Daylight: For strong light environment.
Setting Up Functions Before Taking Pictures Setting An Image At Protect Status (Preset : Unlock) To set an image at protect status can prevent the selected image from being erasing. 1. Select "Protect". 2. Select "Lock" to protect the selected image. ) to confirm the setting. 3. Press Right Direction Button ( Note ) is shown on the right After the above steps are done, please check if the ( side of the TFT LCD screen. If it is not shown please repeat the above steps.
Setting Up Functions Before Taking Pictures Setting Up Beep Sound Safety (Preset :Notes On) ). Please set the Mode Dial at Set Up Mode ( 1. Select "Beep". ). 2. Press Right Direction Button ( 3. Select "On" to activate the beep sound or select "No" to disable the beep sound. ) to confirm the setting. 4. Press Right Direction Button ( Setting Up Auto Power Off (Preset: 2 Minutes) 1. Select "Power Off". ). 2. Press Right Direction Button ( 3. Select the time of auto power off from 1 to 10 minutes .
Playback / Erasing Taking Pictures 1. Switch on the power bySafety sliding Notes the Power Switch to the side, holding it for 1 second, and letting it go. ) for still image 2. Set the Mode Dial at Shooting Mode ( ) for videos. capture or Movie Clip Mode ( 3. If you would like to capture a still image, please set the focus switch at correct focus range which are: Macro ( ): 0.18m~0.25m Portrait ( ): 0.8m~1.3m Normal ( ): 1.3m~infinity 4. Set up all the preferred features and functions. 5.
Installing Camera Driver Playback / Erasing Playing A Recorded Movie Clip ). Use Up ( Please set the Mode Dial at Playback Mode ( ) Direction Buttons to select a movie clip. and Down( Select a recorded movie clip. ) to play the movie clip. Press Right Direction Button ( Under Microsoft Windows 98 / 98SE ) 1. Turn on the computer. 2. Insert the CD into the CD-ROM Drive. Note ) to pause the playing and You can press Right Direction Button ( ) again to cancel the pause.
Installing Camera Driver 3. A welcome window appears and please click "Next" to got to next step. Installing Camera Driver 6. Click "Yes" to proceed the installation of DirectX8.1. 7. A license agreement appears and please read the content of the agreement. If you accept the terms of the license agreement, click "Yes" to go the next step. Or you can click "No" to cancel the installation of Ulead Explorer 7.0 SE Platinum. 4. The computer will start the installation. 5.
Installing Camera Driver 9. Please click "OK" to restart the PC. Installing Camera Driver Under Microsoft Windows 2000 1. Turn on the computer. 2. Insert the CD into the CD-ROM Drive. If the PC is set to auto run the program, simply click "Driver" to start the installation. If the PC is not set to auto run the program, please go to the Start Menu, click "Run" and key in "CD-ROM Drive:\Camera.exe" and then click "OK" Button.
Installing Camera Driver 3. Click "OK" to proceed the installation of DirectX8.1. Installing Camera Driver 6. Please click "OK" to restart the PC. 4. A license agreement appears and please read the content of the agreement. If you accept the terms of the license agreement, click "Yes" to go the next step. Or you can click "No" to cancel the installation of Ulead Explorer 7.0 SE Platinum 5. The PC will start the installation of DirectX8.1. After the installation of Direct X8.
Installing Camera Driver Under Microsoft Windows ME / XP Windows ME and Windows XP do not need to install this driver. Please skip the driver installation and go to page 33 for installation of Ulead Photo Explorer or go to page 52 to download the stored image(s) onto the PC. 40 Installing Camera Driver Under Mac 9.X or later This camera supports only Mac 9.X or versions later. If the operating system that you are using is later than Mac 9.X, you will not need to install this driver.
Installing Ulead Photo Explorer Under Windows Operating System (Windows 98/98SE/2000/ME/XP) 1. Insert the CD into the CD-ROM Drive. Installing Ulead Photo Explorer 4. Choose operating language. 9 languages offered can be selected ,which are Simplified Chinese, Traditional Chinese, English, French, German, Italian, Japanese, Korean, and Spanish. 2. Click "Photo Explorer 7.0 SE Platinum" . 3. Click "Install Ulead Photo Explorer 7.0 SE Platinum" . 42 5.
Installing Ulead Photo Explorer 6. A window of license agreement appears and please read the content and click "Yes" to go to next step if you accept the terms of the agreement. Or you can click "No" to cancel the installation of Ulead Explorer 7.0 SE Platinum. 7. Enter your name and your company's name and click "Next" . 44 Installing Ulead Photo Explorer 8. This software will be installed at "Disk C \Program Files \ Ulead Systems \ Ulead Photo Explorer 7.0" automatically if you click "Next" .
Installing Ulead Photo Explorer Installing Ulead Photo Explorer 10. The computer will add a new program folder named "Ulead Photo Explorer 7.0 SE Platinum" . Click "Next" to go to next step. 12. The computer will start installing "Ulead Photo Explorer 7.0 SE Platinum" now. You can click "Cancel" to stop the installation. 11. Set up the default TV system. Please select the country you are in. 13. Select the file association you would like to set and click "Next" to go to next step.
Installing Ulead Photo Explorer 14. If the operating system you are using is Windows 98, 98SE or ME, you'll have to restart the computer to complete the installation of Ulead Photo Exlorer 7.0 SE Platinum. It is suggested to restart the computer now. Click "Finish" to complete the installation and restart the computer. Installing Ulead Photo Explorer Under Macintosh Operating System (Mac 9.X or later) 1. Turn on the computer. 2. Insert the CD into the CD-ROM Drive.
Installing Ulead Photo Explorer 4. Choose "Ulead Photo Explorer" and copy this file to the desktop. Installing Ulead Photo Explorer If a warning window shows please visit Apple's official web-site http://kbase.info.apple.com to download the latest version of CarbonLib. A.Key in "CarbonLib" in the search bar and click "Search" button. 5. Click on the newly created "Ulead Photo Explorer" icon on the desktop and double click on "Photo Explorer" folder to start Ulead Photo Explorer. b.
About Ulead Photo Explorer Photo Explorer Software license The software described in this document is furnished under a License Agreement which is included with the product. This Agreement specifies the permitted and prohibited uses of the product. Licenses and trademarks ICI Library 1991-1992 C-Cube Microsystems. Ulead Systems, Inc. And the Ulead logo are trademarks of Ulead Systems, Inc.
About Ulead Photo Explorer About Ulead Photo Explorer The Browser Using the Ulead Photo Explorer Browser: Just like Windows Explorer, Photo Explorer's Browser shows the hierarchy of drives and folders in your computer at the left hand side and displays the files in a selected folder at the right. What's special about Photo Explorer's Browser is that multimedia files can be shown as visual thumbnails for easier identification. Simply click a desired file to immediately get an idea of the file's contents.
About Ulead Photo Explorer About Ulead Photo Explorer Zoom in Package Zoom out Create Slide Show Disc Or igina l s i z e Stitch Panorama F i t t o s c re e n Share R o t a t e l e ft P r e v i e w Pa n e Show Invert Slide Show Options R o t a t e r ig h t Close Im a g e P r o p e r t i e s Slider of Zoom in/out N u m b e r o f s e l e c t e d fi l e s New Open Save Save As Add Slide Show Pane R e move Move Rotate S l i d e P r o p e r ti e s Screen Saver Export 56 57
About Ulead Photo Explorer The Viewer Photo Explorer has a built-in Viewer integrated with the Browser. You can use the built-in Viewer to: Get a full-size or full-screen view of images. Navigate through images using the keyboard, toolbar buttons, or menu commands, or let Viewer automatically step through the images. Copy, rename or delete an image file. Copy an image for pasting onto your desired image editor. Rotate, flip and edit images, and then save the changes.
Downloading Image(s) Onto Your PC About Ulead Photo Explorer Using the Ulead Photo Explorer Viewer: Area Icon Function Function Describe Open E xplorer Open Print Image First image Previous Under Windows Operating System (Windows 98/98SE/2000/ME/XP) Downloading Image(s) From Removable Disk 1. Turn on the PC. 2. Switch on the camera. 3. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 4.
Downloading Image(s) Onto Your PC Downloading Image(s) Onto Your PC Under Macintosh Operating System (Mac 9.X or later) Downloading Image(s) Through Ulead Photo Explorer 1. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 2. Start Ulead Photo Explorer 7.0 SE Platinum . 3. Click "File \ Download From Memory Card" to get the stored image(s). 62 Downloading Image(s) From Removable Disk 1. Turn on the PC. 2.
Downloading Image(s) Onto Your PC Downloading Image(s) Through Ulead Photo Explorer 1. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 2. Start Ulead Photo Explorer 7.0 SE Platinum . 3. Click File \ Download From Memory Card to get the stored image(s).
Specifications Image Sensor Specifications Type Total Pixels Effective Pixels Focal Length F No. Digital Zoom CCD Approx. 2.1 Mega pixels Approx. 1.92 Mega pixels Lens f=5.6mm (35mm film equivalent : 43mm) F3.5 / F8.0 Shooting Mode: 4X, Playback Mode: 4X (Continuously) LCD Display 1.6" color TFT LCD Viewfinder Optical Viewfinder Optical image viewfinder Focusing Type Fixed Focus with three-step manual adjustment Range Macro: 0.18-0.25m, Portrait: 0.8-1.3m, Normal: 1.
Specifications Warranty and After-sales Service System Requirments For Windows For Macintosh CPU:better than MMX Pentium 233MHz ( XP : Pentium II 300MHz) Windows 98/98SE/2000/ME/XP Minimum 32MB RAM(XP: 128MB) 110MB of available hard-disk space USB port, CD-ROM drive 800x600 pixels,16-bit color display compatible monitor (24-bit color display recommended) Power Mac G3 or later Mac OS 9.X or later Minimum 64MB RAM 110MB of available hard-disk space USB port, CD-ROM drive QuickTime 4.
Warranty and After-sales Service FCC Compliance Statement: Declaration of Conformity Responsible party: KONICA PHOTO IMAGING Address: 725 Darlington Avenue Mahwah, NJ 07430, U.S.A. Telephone number: (201) 574-4000 Warranty and After-sales Service CANADA ONLY Industry Canada's Compliance Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil num rique de la classe B est conforme la norme NMB-003 du Canada This device complies with Part 15 of the FCC Rules.
