- Konica Minota Printer User's Guide 5430 DL
Table Of Contents
- Trademarks
- Copyright Notice
- Notice
- SOFTWARE LICENSE AGREEMENT
- Introduction
- Software Installation
- Using the Windows Status Display and Printer Status Monitor Center
- Printer Control Panel and Configuration Menu
- Using Media
- Replacing Consumables
- Maintaining the Printer
- Troubleshooting
- Installing Accessories
- Appendix

Output Tray
55
1 Load plain paper into the tray.
2 From the printer driver, specify the layout for duplex printing.
3 Click OK.
" With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All media is output to the face-down output tray on top of the printer. This tray
has a capacity of 250 sheets (A4/Letter) of 80 g/m
2
(22 lb) paper.
" If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
" Remove transparencies as soon as possible from the output tray to
avoid static buildup.
If “Booklet Left Binding” is selected, the pages can be
folded as a left-bound booklet.
If “Booklet Right Binding” is selected, the pages can be
folded as a right-bound booklet.
1
1
2
3
3
3
1
1
2