mcPS_Firmware.
mcPS_Firmware.
mcPS_Firmware.book i ページ ２００７年１０月９日 火曜日 午後２時７分 Contents 1 Updating the Firmware (for Windows) ............................................................ 1 System Requirements 2 Starting the Firmware Updater 3 For a Network Connection 6 If Spooling of the Data Fails 8 For a Local Connection 9 If Spooling of the Data Fails 11 When Specifying the IP Address of the Printer 12 If Transferring of the Data Fails 14 2 Updating the Firmware (for Macintosh) ....................................................
mcPS_Firmware.
mcPS_Firmware.
mcPS_Firmware.book 2 ページ ２００７年１０月９日 火曜日 午後２時７分 System Requirements Computer: – PC with a Pentium 2, 400 MHz or faster processor (A Pentium 3, 500 MHz or faster processor is recommended.) Operating system: – Microsoft Windows XP Home Edition/Professional, Windows 2000, Windows Vista Home Basic/Home Premium/Business/Enterprise/ Ultimate Available hard disk space: – Approximately 20~26 MB Memory: – 128 MB or more Interface: – 10Base-T/100Base-TX/1000Base-T Ethernet – USB 2.
mcPS_Firmware.book 3 ページ ２００７年１０月９日 火曜日 午後２時７分 Starting the Firmware Updater CAUTION You must have administrator privileges in order to update the firmware. CAUTION Before starting the firmware updater, turn on the printer, and make sure that it is correctly connected. CAUTION When the firmware is updated, the printer control panel settings may return to their defaults. Before starting the firmware updater, be sure to print the configuration page to check the settings.
mcPS_Firmware.book 4 ページ 3 4 4 ２００７年１０月９日 火曜日 午後２時７分 The printer name and firmware version are displayed. Click the [Next] button. The license agreement is displayed. Select “I agree”, and then click the [Next] button.
mcPS_Firmware.book 5 ページ 5 ２００７年１０月９日 火曜日 午後２時７分 The list of printer drivers is displayed. Select the appropriate connection for the environment where the printer is being used. For a Network Connection Select “Network port”. →Continue with page 6. For a Local Connection Select “Local port”. →Continue with page 9. When Specifying the IP Address of the Printer Select “Printer IP address”. →Continue with page 12.
mcPS_Firmware.book 6 ページ ２００７年１０月９日 火曜日 午後２時７分 For a Network Connection When “Network port” is selected, a list of printer drivers for the network port appears. 1 2 6 Select the printer driver, and then click the [Next] button. A message appears, requesting confirmation to update the firmware. Click the [Start] button to begin transferring the firmware.
mcPS_Firmware.book 7 ページ 3 The result of the firmware transfer is displayed. Click the [Exit] button. " 4 ２００７年１０月９日 火曜日 午後２時７分 If the firmware was successfully updated, the printer will automatically restart. Do not turn off the printer while its firmware is being updated. Print the configuration page from the printer’s control panel to check the settings. " " When the firmware is updated, the printer control panel settings may return to their defaults.
mcPS_Firmware.book 8 ページ ２００７年１０月９日 火曜日 午後２時７分 If Spooling of the Data Fails If spooling of the data fails, the following message appears. " 1 2 8 If spooling fails, data may remain in the printer spooler. Delete this data, and then try again. – (Windows XP) Click “Printers and Faxes” in the Start menu, and then double-click the appropriate printer icon. Select “5450Gxxxxxxxx” below “Document Name”, and then click “Cancel All Documents” in the Printer menu or “Cancel” in the Document menu.
mcPS_Firmware.book 9 ページ ２００７年１０月９日 火曜日 午後２時７分 For a Local Connection When “Local port” is selected, a list of printer drivers for the local port appears. 1 2 Select the printer driver, and then click the [Next] button. A message appears, requesting confirmation to update the firmware. Click the [Start] button to begin transferring the firmware.
mcPS_Firmware.book 10 ページ 3 The result of the firmware transfer is displayed. Click the [Exit] button. " 4 If the firmware was successfully updated, the printer will automatically restart. Do not turn off the printer while its firmware is being updated. Print the configuration page from the printer’s control panel to check the settings. " " 10 ２００７年１０月９日 火曜日 午後２時７分 When the firmware is updated, the printer control panel settings may return to their defaults.
mcPS_Firmware.book 11 ページ ２００７年１０月９日 火曜日 午後２時７分 If Spooling of the Data Fails If spooling of the data fails, the following message appears. " 1 2 If spooling fails, data may remain in the printer spooler. Delete this data, and then try again. – (Windows XP) Click “Printers and Faxes” in the Start menu, and then double-click the appropriate printer icon. Select “5450Gxxxxxxxx” below “Document Name”, and then click “Cancel All Documents” in the Printer menu or “Cancel” in the Document menu.
mcPS_Firmware.book 12 ページ ２００７年１０月９日 火曜日 午後２時７分 When Specifying the IP Address of the Printer When “Printer IP address” is selected, the “Printer IP address” box becomes available. 1 2 12 Type in the IP address, and then click the [Next] button. A message appears, requesting confirmation to update the firmware. Click the [Start] button to begin transferring the firmware.
mcPS_Firmware.book 13 ページ 3 The result of the firmware transfer is displayed. Click the [Exit] button. " 4 ２００７年１０月９日 火曜日 午後２時７分 If the firmware was successfully updated, the printer will automatically restart. Do not turn off the printer while its firmware is being updated. Print the configuration page from the printer’s control panel to check the settings. " " When the firmware is updated, the printer control panel settings may return to their defaults.
mcPS_Firmware.book 14 ページ ２００７年１０月９日 火曜日 午後２時７分 If Transferring of the Data Fails If transferring of the data fails, the following message appears. 1 2 14 Click the [OK] button. Check that the printer is ready and that it is correctly connected, and then click the [Update again] button.
mcPS_Firmware.
mcPS_Firmware.book 16 ページ ２００７年１０月９日 火曜日 午後２時７分 System Requirements Computer: – Apple Macintosh computer with a PowerPC G3 or later processor (A PowerPC G4 or later is recommended.) – Apple Macintosh computer with an Intel processor Operating system: – MacOS X 10.2 or later (We recommend installing the newest patch.
mcPS_Firmware.book 17 ページ ２００７年１０月９日 火曜日 午後２時７分 Starting the Firmware Updater CAUTION You must have administrator privileges in order to update the firmware. CAUTION Before starting the firmware updater, turn on the printer, and make sure that it is correctly connected. CAUTION When the firmware is updated, the printer control panel settings may return to their defaults. Before starting the firmware updater, be sure to print the configuration page to check the settings.
mcPS_Firmware.book 18 ページ 3 4 18 ２００７年１０月９日 火曜日 午後２時７分 The printer name and firmware version are displayed. Click the [Next] button. The license agreement is displayed. Select “I agree”, and then click the [Next] button.
mcPS_Firmware.book 19 ページ ２００７年１０月９日 火曜日 午後２時７分 5 The screen for specifying the IP address of the printer appears. 6 Type in the IP address, and then click the [Next] button. 7 A message appears, requesting confirmation to update the firmware. Click the [Start] button to begin transferring the firmware.
mcPS_Firmware.book 20 ページ 8 The result of the firmware transfer is displayed. Click the [Exit] button. " 9 If the firmware was successfully updated, the printer will automatically restart. Do not turn off the printer while its firmware is being updated. Print the configuration page from the printer’s control panel to check the settings. " " 20 ２００７年１０月９日 火曜日 午後２時７分 When the firmware is updated, the printer control panel settings may return to their defaults.
mcPS_Firmware.book 21 ページ ２００７年１０月９日 火曜日 午後２時７分 If Transferring of the Data Fails If transferring of the data fails, the following message appears. 1 2 Click the [OK] button. Check that the printer is ready and that it is correctly connected, and then click the [Update again] button.
mcPS_Firmware.
