HOME Force 65
HOME
HOME Recycled paper is used for the inside pages of this book.
HOME © 2002 by Konica Business Technologies, Inc. MAINTENANCE AGREEMENT: The KONICA Force 65 Network Printing System will give you many years of trouble-free service. To ensure high-quality printing performance and to prevent premature wear or failure of precision parts and components, schedule periodic cleaning and routine adjustments.
HOME Contents Contents Section 1: Introduction To the User ..................................................................................................................... 1-2 Features Overview .......................................................................................................... 1-3 Section 2: Safety Information User Instructions ............................................................................................................. 2-2 Machine Labels .......................
HOME Contents Section 4: Media Information Main Body Trays ............................................................................................................. 4-2 LT-402 Large Capacity Tray (Option) ............................................................................. 4-3 LT-412 Large Capacity Tray (Option) ............................................................................. 4-3 Automatic Duplex Unit.................................................................................
HOME Contents Section 6: Output Modes FS-110/210 Finisher Specifications ................................................................................ 6-2 Finisher Type ........................................................................................................... 6-2 Primary (Main) Tray ................................................................................................. 6-2 Secondary (Sub) Tray.....................................................................................
HOME Contents Section 8 : Maintenance & Supplies (continued) Empty Trash Basket of PZ-108 Punching / Z-Folding Unit ........................................... 8-13 Preventive Maintenance................................................................................................ 8-14 Reading the PM Counter ....................................................................................... 8-14 Printing the PM Counter....................................................................................
HOME Section 1: Introduction To the User ...........1-2 Features Overview ...........
HOME Introduction To the User Welcome to the Konica Force 65 Network Printing System, which includes the main body engine, the print controller, and the optional network interface card. Separate user documentation is provided with the print controller and the network interface card. This User's Manual describes the layout of the main body machine configured with both standard and optional equipment and explains control panel functions and procedures for all operations.
HOME Introduction Features Overview The Konica Force 65 Network Printing System connects the Konica Force 65 main body engine to the IP-511 Printer Controller, enabling the system to function as a network printer or print server on the network. • All-Image Area Prints completely to the edges of the paper to avoid image loss. • ATS - Automatic Tray Switching Automatically switches to another paper tray when a tray becomes empty during a print job.
HOME Introduction Features Overview (continued) • Manual Shut-off Shuts off the main power when pressing [POWER SAVER ON/OFF] key. • Non Standard Size for Multi-Sheet Bypass Tray Allows special paper size to be loaded in the Multi-sheet bypass tray and entered using the touch screen keypad in order to avoid paper misfeed.
HOME Introduction Features Overview (continued) • Repeat Image Accepts the horizontal image area across the page, and repeats it down the page as many times as the repeat width setting (10 ~ 150mm) permits, in manual or auto. • Reverse Image Reverses the image from black-on-white to white-on-black or vice versa.
HOME Introduction Features Overview (continued) • Wide Size Paper Prints onto paper slightly larger than the specified regular size.
HOME Section 2: Safety Information User Instructions ...........2-2 Machine Labels ...........2-3 Label Locations...............2-3 Regulations ...........2-5 FCC Regulations...............2-5 Canadian Department of Communications Regulations...............2-5 FDA Regulations...............2-5 Machine Installation and Power Requirements ...........2-6 Machine Handling and Care ...........2-8 Routine Safety ...........2-9 Finisher Capacity Requirements .........
HOME Safety Information User Instructions The following pages include important safety information, which you must read and understand before you attempt to operate the machine. If you have any concerns about safety matters, please contact your service representative. Keep this manual located permanently with the machine, so that this safety information is readily available. Machine safety labels are attached to the internal area of the machine.
HOME Safety Information Machine Labels Label Locations WARNING This area generates high voltage. If touched, electrical shock may occur. DO NOT TOUCH. CAUTION High temperature! Do not touch. Use care when clearing paper. ATTENTION Température élevée! Risque de brûlure. Soyez prudent en retirant la feuille coincée. PRECAUCION ¡Temperatura alta! No tocar. Tener cuidado al remover el papel. CUIDADO Alta temperatura! Não toque! Tenha cuidado ao remover o papel.
HOME Safety Information Machine Labels (continued) Label Locations (continued) (Finisher with PI-110 Cover Sheet Feeder only) CAUTION DO NOT insert your finger into the bottom of the upper part of the feeder when returning to its original position; otherwise you may be injured. CAUTION DO NOT put your hand between the main body and tray; otherwise you may be injured.
HOME Safety Information Regulations FCC Regulations Warning: The Konica Force 65 generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, interference with radio communications may result.
HOME Safety Information Machine Installation and Power Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE. ❒ FIRE PREVENTION Install machine away from flammable or volatile materials. Routinely check for abnormal heat from power cord and/or plug. ❒ SHORT CIRCUIT FROM WATER DAMAGE Do not install or operate this equipment outdoors near a lake, pond, or river, etc.
HOME Safety Information Machine Installation and Power Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, RISK OF ELECTRICAL SHOCK, AND/OR PERSONAL INJURY. ❒ PLUG SOCKET A plug socket is limited in capacity. Use an exclusive power source for this machine; otherwise, overheating and/or smoking may occur. The total power consumption of the main body, plus all peripherals, must not exceed the capacity of the main power supply.
HOME Safety Information Machine Handling and Care WARNING: FAILURE TO HEED THE FOLLOWING WARNING MAY RESULT IN DEATH OR SERIOUS INJURY AND/ OR MACHINE DAMAGE. ❒ MACHINE CONTACT Never touch internal high voltage areas, indicated with a WARNING label. Never touch the drum surface. Never put your hand into the developing unit when removing mishandled paper. CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY.
HOME Safety Information Routine Safety CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY. ❒ PERIODIC CHECK Check for loose connections or excessive heat on power plug, damage to power cord and/ or plug (creased, frayed, scratched or cut, etc.). Be sure the plug is inserted fully, and ground wire is connected correctly. If any abnormality occurs, do not continue to operate the machine.
HOME Safety Information Finisher Capacity Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE. ❒ FINISHER PAPER CAPACITY To prevent paper misfeed, do not exceed the paper capacity of the Finisher. FS-110/FS-210 Finisher paper weight: 16 lb ~ 24 lb When the selected print quantity exceeds the maximum paper capacity, remove the printed sheets from the finisher while the paper is exiting.
HOME Safety Information Finisher Capacity Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR MACHINE DAMAGE. ❒ FINISHER PAPER CAPACITY (continued) Booklet tray (FS-210 only) 100 sheets max. (11"x17", 8.5"x14") 75 sheets max. (8.5"x11"R, A4R) 50 sheets max. in Three-Folding mode (The maximum number of sheets varies, depending on the number of pages in the booklet and whether Folding or Stapling & Folding is selected. See p. 4-7.
HOME
HOME Section 3: Machine Information Konica Force 65 Overview ...........3-2 Key Operator Functions...............3-3 Service, Repairs & Supplies...............3-3 Machine Labels...............3-3 Service Settings...............3-4 Machine Configuration ...........3-5 External Machine...............3-5 External Machine Call-outs...............3-6 Internal Machine...............3-7 Internal Machine Call-outs...............3-7 Optional Equipment...............3-8 Site Requirements .........
HOME Machine Information Konica Force 65 Overview The Force 65 Network Printing System provides high quality printing suitable for any IBMcompatible or Macintosh environment. The printer's main body engine works in conjunction with the new open architecture (NOA) of the print controller to provide a flexible and modular way of customizing the language interpreter, the I/O and communication, and the system control.
HOME Machine Information Konica Force 65 Overview (continued) Key Operator Functions Access to the Key Operator mode may require entry of a key operator password previously set by your service representative. A Key Operator may make various custom settings that affect printer functions. We recommend using a password to limit access to the Key Operator mode to an authorized person. Service, Repairs & Supplies Service and repairs should be performed only by an authorized service representative.
HOME Machine Information Konica Force 65 Overview (continued) Service Settings Setting changes for the following functions can be made by your service representative. Finisher-Paper Capacity In the default condition, the Force 65 will produce unlimited sets. If required, your service representative can set the printer to stop printing when the number of prints exceeds specified capacity.
HOME Machine Information Machine Configuration External Machine !6 Control panel !5 LCD Touch screen !3 Power switch q Toner access door w Key counter (option) e Multi-sheet bypass tray !1 FS-110 Finisher (option) !4 Main power switch o Front doors i Tray 1 u Tray 2 (Rear-left side of main body) !2 PI-110 Cover sheet feeder (option) y Tray 3 t Right side door r LT-402 Large capacity tray (option) r LT-412 Large capacity tray (option) !1 FS-210 Finisher (option) !0 PZ-108 Punching / Z-Folding Unit (o
HOME Machine Information Machine Configuration (continued) External Machine Call-outs 1 Toner access door opens to replenish the toner. 2 Key counter (option) manages the number of prints made on the machine. 3 Multi-sheet bypass tray used for small quantity printing onto plain paper or special paper. 4 LCT: Large capacity tray LT-402/LT-412 option holds 4,000 sheets. 5 Right side door opens to allow removal of mishandled paper.
HOME Machine Information Machine Configuration (continued) Internal Machine q Toner cartridge u Total counter y Fixing unit w Toner cartridge holder lever e Conveyance/ Fixing unit r Lever A t Drum unit Internal Machine Call-outs 1 Toner cartridge holds toner and is replaced when replenishing toner. 2 Toner cartridge holder lever can be pulled forward to withdraw the toner cartridge holder for replacing the toner cartridge.
HOME Machine Information Machine Configuration (continued) Optional Equipment PK-110/120 Punching kit PI-110 Cover sheet feeder PS-351 Postscript 3 IP-511 Printer controller Key counter FS-110 Finisher LT-402 Large capacity tray Force 65 main body FS-210 Finisher LT-412 Large capacity tray PZ-108 Punching / Z-Folding unit 3-8 Machine Information
HOME Machine Information Machine Configuration (continued) Optional Equipment (continued) t Secondary (Sub) tray q Finisher door r Primary (Main) tray t Secondary (Sub) tray q Finisher door r Primary (Main) tray e Booklet tray (FS-210 Finisher only) FS-110 Finisher w Booklet mode outlet (FS-210 Finisher only) FS-210 Finisher 1 Finisher door opens to the internal Finisher to allow clearing mishandled paper, replenishing staples, and emptying trash basket of Punching kit.
HOME Machine Information Machine Configuration (continued) Optional Equipment (continued) r Sub tray conveyance lever e Cover sheet conveyance lever w PK-120 Punching kit (option) q Entrance lever r Sub tray conveyance lever t Stacker conveyance lever e Cover sheet conveyance lever w PK-110 Punching kit (option) FS-110 Finisher q Entrance lever o Trash basket i Stacker unit u Stacker unit knob !0 Cartridge housing !1 Stacker unit handle 1 2 3 4 5 6 7 8 9 10 11 y Lower lever FS-210 Finisher with PK-11
HOME Machine Information Machine Configuration (continued) Optional Equipment (continued) r Upper tray e Upper tray guide plates w Upper unit release lever t Lower tray y Lower tray guide plates q Cover sheet feeder control panel 1 Cover sheet feeder control panel controls cover sheet feeder operations. 2 Upper unit release lever can be moved to slide the upper unit of cover sheet feeder for removal of mishandled paper. 3 Upper tray guide plates hold cover sheets to fix the position.
HOME Machine Information Machine Configuration (continued) Optional Equipment (continued) w LCT left side door q LCT top door e LCT lever q LCT top door w LCT left side door e LCT lever r LCT paper guides r LCT paper guides y LCT bottom plate y LCT bottom plate u Rear stopper t Paper loading button u Rear stopper t Paper loading button LT-402 Large capacity tray 1 2 3 4 5 6 LT-412 Large capacity tray LCT top door opens to allow paper loading.
HOME Machine Information Machine Configuration (continued) Optional Equipment (continued) r Handle e Knob w Right lever t Left lever y Waste basket q Punching / Z-Folding unit front door 1 Punching / Z-Folding unit front door opens to allow removal of mishandled paper or waste paper. 2 Right lever opens to allow removal of mishandled paper. 3 Knob can be turned to ease removal of mishandled paper. 4 Handle can be withdrawn to allow removal of mishandled paper.
HOME Machine Information Site Requirements Unit: inches (mm) 18.7 (475) 25.6 (650) 15.7 (400) 37.4 (950) 29.9 (760) 4.7 (120) 39.0 (990) 60.0 (1525) 72.0 (1830) Force 65 Unit: inches (mm) 3.9 (100) 29.2 (741) 25.8 (656) 16.1 (410) 25.6 (650) 16.9 (430) 3.9 (100) 37.4 (950) 29.9 (760) 39.0 (990) 79.5 (2021) 72.0 (1830) Force 65 + FS-110 Finisher + LT-402 Large capacity tray 3-14 Machine Information 4.
HOME Machine Information Site Requirements (continued) Unit: inches (mm) 3.9 (100) 13.0 (331) 29.2 (741) 16.1 (410) 25.8 (656) 6.9 (174) 25.6 (650) 26.4 (670) 3.9 (100) 37.4 (950) 29.9 (760) 4.7 (120) 44.9 (1140) 39.0 (990) 95.9 (2435) 72.0 (1830) Force 65 + FS-210 Finisher + PZ-108 Punching / Z-Folding unit + PI-110 Cover sheet feeder + LT-412 Large capacity tray NOTES: 1 Dimensions are in inches with millimeters included in parentheses.
HOME Machine Information Control Panel Layout q e w r t y u i TIMER POWER SAVER ON / OFF CHECK HELP STOP/PAUSE COUNTER CLEAR QTY. START !2 !1 !0 o 1 Power switch turns printer power On/Off when pressed. 2 LCD touch screen displays machine and printing status, help information, interactive screens, and touch keys for selecting all functions. 3 CHECK displays a screen showing all settings that are selected for the current job. 4 MODE switches the machine operation mode.
HOME Machine Information Specifications Product Name Konica Force 65 Network Printing System Engine Type Dual Beam Laser, Electrostatic Engine Speed 65 pages per minute Recommended Operating Environment 50°~86°F (10°~30°C); 10~80% RH Warm Up Approx. 6 min. @68°(20°C); 50% RH First Print Out Time Approx. 3.4 sec. for 8.5"x11" Voltage 120V ± 10% Current 15A Dedicated line recommended Frequency 60Hz Grounding Isolation recommended Power Consumption Max. 1,800 VA (full option) Noise Level (full system) Approx.
HOME Machine Information Specifications (continued) Options Finisher (FS-110/FS-210) Cover Sheet Feeder (PI-110) Punching Kit (PK-110/120) Punching / Z-Folding Unit (PZ-108) Large Capacity Tray (LCT) (LT-402/LT-412) Image Processor (IP-511) PostScript Unit (PS-351) Machine Weight 418.5 lb (190 kg) +121 lb (55 kg) w/FS-110 Finisher +143 lb (65 kg) w/FS-210 Finisher +23 lb (10.5 kg) w/PI-110 Cover sheet feeder +4.4 lb (2 kg) w/PK-110 Punching kit +6.6 lb (3 kg) w/PK-120 Punching kit +83.
HOME Machine Information Specifications (continued) Punching / Z-Folding Unit (PZ-108) Width: 6.7 in. (169 mm) Depth: 26.0 in. (660 mm) Height: 36.6 in. (930 mm) Automatic Duplex Unit (ADU) Paper size: 11"x17", 8.5"x14", 8.5"x11", 5.5"x8.5" Paper weight: 16~110 lb (200 g/m2 thick paper) Non-stack type Stapling Finisher (FS-110/210) Power source: Main body Non-sort/Sort/Group mode: 500 sheets 5.5"x8.5"R 3000 sheets 8.5"x11"/R (FS-110 Finisher) 2500 sheets 8.5"x11"/R (FS-210 Finisher) 1500 sheets 11"x17", 8.
HOME Machine Information Specifications (continued) Cover Sheet Feeder (PI-110) Power source: Finisher Paper size: Upper tray 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69", 210 mm x 297 mm) Lower tray 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.
HOME Machine Information Specifications (continued) Large Capacity Tray (LT-402) Paper type: Plain paper (13~110 lb (200 g/m2 thick paper)) Paper size: 8.5"x11", A4 Dimensions: Width 16.9 in (430 mm) Depth 25.2 in (639 mm) Height 27.2 in (690 mm) Weight: 66 lb (30 kg) Power source: supply from main body Large Capacity Tray (LT-412) Paper type: Plain paper (13~110 lb (200 g/m2 thick paper)) Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, A3, B4, A4, A4R Dimensions: Width 26.4 in (670 mm) Depth 25.
HOME
HOME Section 4: Media Information Main Body Trays ...........4-2 LT-402 Large Capacity Tray (Option) ...........4-3 LT-412 Large Capacity Tray (Option) ...........4-3 Automatic Duplex Unit ...........4-4 Multi-Sheet Bypass Tray ...........4-4 FS-110/210 Finisher (Option) ...........4-5 FS-110/210 Finisher Primary (Main) Tray...............4-5 FS-110/210 Finisher Secondary (Sub) Tray...............4-6 FS-210 Finisher Booklet Tray...............4-6 PI-110 Cover Sheet Feeder (Option) ...........
HOME Media Information Main Body Trays Paper Size: STD size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A3, B4, A4, A4R, B5, B5R, A5 (user-adjustable) STD size (spec.): specify A4R instead of 8.5"x11"R specify A5 instead of 5.5"x8.5" Non STD size: input the measures of paper between max. 314 mm x 459 mm and min. 210 mm x 140 mm. Wide paper: 11"x17"W, 8.5"x11"W, 8.5"x11"WR, 5.5"x8.5"W, A3W, B4W, A4W, A4WR, B5W, A5W (user-adjustable) NOTES: • F4: 8"x13", 203 mm x 330 mm A3: 11.69"x16.
HOME Media Information LT-402 Large Capacity Tray (Option) Paper Size: 8.5"x11" STD size: 8.5"x11", A4 (service-adjustable) STD size (spec.): cannot be specified Non STD size: input the measures of paper between max. 314 mm x 223 mm and min. 257 mm x 182 mm Wide paper: 8.5"x11"W, A4W (service-adjustable) NOTE: Non STD size setting for LCT can be made in the Key Operator mode. See p. 9-18 ~ p. 9-19 .
HOME Media Information Automatic Duplex Unit Paper Size: STD size: 11"x17"~5.5"x8.5" STD size (spec.): 11"x17"~A5 Wide paper: 11"x17"W~A5W NOTE: 5.5"x8.5"/W and A5/W print paper is available in portrait orientation feeding only. Paper Weight: 16~110 lb (200 g/m2 thick paper) Multi-Sheet Bypass Tray Paper Size: STD size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A3, B4, A4, B5, B5R STD size (spec.): F4, A4R, A5, A5R, B6R Non STD size: input the measures of paper between max.
HOME Media Information FS-110/210 Finisher (Option) FS-110/210 In-Bin Stapler Finisher accepts LEDGER (11"x17"), LEGAL (8.5"x14") and LETTER/R (8.5"x11"/R) standard/wide paper sizes (5.5"x8.5"R/W in Non-sort, Sort or Group mode). FS-110/210 Finisher Primary (Main) Tray FS-110/210 Finisher (capacities at 20lb, unless otherwise indicated) Non-sort/Sort/Group mode: 500 sheets 5.5"x8.5"/5.5"x8.5"W, 5.5"x8.5"R/5.5"x8.5"WR (A5/A5W, A5R/A5WR) 3,000 sheets 8.5"x11"/8.5"x11"W, 8.5"x11"R/8.
HOME Media Information FS-110/210 Finisher (Option) (continued) FS-110/210 Finisher Secondary (Sub) Tray FS-110/210 Finisher (capacities at 20lb, unless otherwise indicated) 200 sheets; max. 12.36"x18.08" (314 mm x 459 mm) ~ min. 3.94"x5.83" (100 mm x 148 mm) CAUTION: When the finisher capacity is exceeded due to the print quantity selected, remove the printed sets while the paper is exiting; otherwise mishandled paper will occur.
HOME Media Information FS-110/210 Finisher (Option) (continued) FS-210 Finisher Booklet Tray (continued) Booklet Tray Capacity : Approx. 100 sheets max. (11"x17", 8.5"x14", A3, B4) 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets) 10 sets max. of 10-sheet-folded booklet (10 x 10 = 100 sheets) 5 sets max. of 20-sheet-folded booklet (5 x 20 = 100 sheets) Approx. 75 sheets max. (8.5"x11"R, A4R) 15 sets max. of 5-sheet-folded booklet (15 x 5 = 75 sheets) 7 sets max.
HOME Media Information PK-110/120 Punching Kit (Option) Paper Size Paper Weight : 11"x17", 8.5"x11" : 13 ~ 45 lb* Number of Punch Holes Hole Diameter Hole Pitch : 3 : 0.315" ± 0.020" (8.0 mm ± 0.5 mm) : 4.253" ± 0.020" (108 mm ± 0.5 mm) *Some 45 lb paper types may not be punched easily. NOTE: Special paper (OHP film, labels, tabbed sheets) cannot be punched. Punching special paper will cause machine trouble. PZ-108 Punching / Z-Folding Unit (Option) Paper Size : Punching mode: 11"x17", 8.
HOME Media Information Paper Supply Message When the paper size specified by the driver is not set in the tray or when paper runs out, the following message is displayed on the screen. In addition, the tray size indicator and the paper supply indicator will blink in the Tray size area of the screen. The paper types specified for the main body trays and LCT (trays 1/2/3) are set in the Key Operator mode.
HOME Media Information Paper Weight Compatibility Chart Main Body Trays All Trays: 16 ~ 24 lb Tray specified in Thick: 25 ~ 110 lb (200 g/m2 thick paper) Tray specified in Thin: 13 ~ 15 lb Tray specified in Tab paper: 25 ~ 45 lb (simplex mode only) Large Capacity Tray 16 ~ 24 lb LCT specified in Thick: 25 ~ 110 lb (200 g/m2 thick paper) LCT specified in Thin: 13 ~ 15 lb LCT specified in Tab paper: 25 ~ 45 lb (simplex mode only) Automatic Duplex Unit 16 ~ 110 lb (200 g/m2 thick paper) Multi-Sheet Bypa
HOME Section 5: Printing Operations Introduction ...........5-2 Wake Up Screen...............5-2 Warm Up Screen...............5-2 Control Panel ...........5-3 The Basic Screen ...........5-3 Check Mode Message ...........5-4 Check Screen...............5-4 Reservation List ...........5-5 Screen Display...............5-5 Help Mode ...........5-6 Stop Printing ...........5-7 Change Job Order ...........5-8 Job Deletion ...........5-9 Previous Job List .........5-10 Non Complete Job List .........
HOME Printing Operations Introduction The Konica Force 65 control panel screen described in this section includes the LCD display screen, basic control panel operations and a sampling of screen messages you will encounter when using this printer. Technical details of the LCD as well as a complete Message List can be found in the Konica Force 65 Service Manual. Wake Up Screen The Wake Up Screen displays immediately after the printer is turned on.
HOME Printing Operations Control Panel TIMER POWER SAVER ON / OFF CHECK HELP STOP/PAUSE COUNTER CLEAR QTY. START The control panel is user friendly and easy to operate. On the right are the Weekly Timer indicator and buttons to select [POWER SAVE ON/OFF], [STOP/PAUSE] and [START] keys. The keypad is used by service personnel to perform technical functions. On the left are keys for displaying the Check Mode and the Help Mode.
HOME Printing Operations Check Mode Message When the temporary stop function is specified by the driver, the following message displays on the Basic Screen. When the [CHECK] key is pressed the Printer Check Screen will be displayed. When the [START] key is pressed, printing will begin. Check Screen When you press the [CHECK] key on the control panel, the Check Screen displays as shown below. You may view the list, which is displayed in real time.
HOME Printing Operations Reservation List Screen Display The reservation list screen displays after the main power switch is turned on and warm up is completed. When no job is reserved, the screen looks like the screen shown below. Notice that the JOB PRIORITY key and the JOB DELETE key are shaded, which means they do not function.
HOME Printing Operations Help Mode Use the [HELP] key to access information about the current screen mode and to learn about setting procedures. The [HELP] key can be pressed from any screen except Key Operator Screens. The Help Screen includes the Help menu icon in the center. When the HELP MENU key is touched, the Help Menu Screen displays a list of all of the printer functions. When a function item is touched, the Help Screen displays information specific to that topic.
HOME Printing Operations Stop Printing To stop printing, press the [STOP/PAUSE] key while the printing job is in process. TIMER POWER SAVER ON / OFF STOP/PAUSE START The printing job will be suspended temporarily, and a popup menu will display on the Basic Screen to ask you to continue or cancel the job. Touch EXIT to cancel the job and delete the data, or CONTINUE to complete the job. NOTE: This procedure deletes the data of the job in progress only. To clear reserved jobs, see p. 5-9.
HOME Printing Operations Change Job Order When a reserved job is listed on the screen, you may select the Status display key to highlight the job and then touch the JOB PRIORITY key to change the order of priority. (See screens below.) Screen without Job Priority change Screen with Job Priority change Note that it is not possible to change the priority of a job in the process of printing.
HOME Printing Operations Job Deletion Touch the Status key to highlight a Job, then touch the JOB DELETE key to delete the Job. Before the Job is deleted, a pop up screen allows you to confirm the deletion. Touch YES to delete the Job. Touch NO to keep the Job. Keep in mind that a Job in progress and a Job in data transmission cannot be deleted.
HOME Printing Operations Previous Job List The Previous Job List can be displayed by touching the PREVIOUS JOB LIST key at the bottom of the screen. The sample below shows that four previous Jobs per screen can be displayed. If more Jobs are able to be displayed, up and down arrow keys will become available at the bottom of the screen. Use these keys to scroll back and forth to display a maximum of sixteen Jobs, four Jobs per screen. When you touch OK, the Reservation List Screen is displayed.
HOME Printing Operations Non Complete Job List The Non Complete Job List can be displayed by touching the NON COMPLETE JOB LIST key at the bottom of the screen. The sample below shows that four non complete Jobs per screen can be displayed. If more Jobs are able to be displayed, up and down arrow keys will become available at the bottom of the screen. Use these keys to scroll back and forth to display a maximum of sixteen Jobs, four Jobs per screen.
HOME Printing Operations Change Setting In the event that the machine detects mixed originals with different widths that cannot be stapled, printing will stop and the machine will enter Wait Mode. The CHANGE SETTING key enables you to change the setting and restart the Job. Touch the CHANGE SETTING key, change the setting, then touch OK. When the Reservation List Screen reappears, press [START] key to restart the Job. Waiting screen alternately displays "Print on Letter if you restart the Job.
HOME Printing Operations Print Size Selecting Paper Type/Size for Multi-Sheet Bypass Tray 1 Open the Multi-sheet bypass tray, and load the print paper on the tray. See p. 8-5, p. 8-8 for further details. 2 Touch Bypass key, then touch PAPER TYPE/SIZE. The Paper Type/Size Selection Screen will be displayed. 3 Touch the desired key. Paper Type/Size Selection Screen • When Thick, Thin, Tab paper, OHP, Trace, or User is highlighted, a printing job will be performed conforming to the selected paper type.
HOME Printing Operations Controller Screen The Controller Screen displays separate sections for Messages, Icons, the Main Menu, and a Main window. • The Message section displays the characters sent from the controller and include a max. of 40 digits x 2 lines. • The Icon area displays engine status icons relating to Add Toner/PM Call, Vacant Memory Capacity. • The Main Menu area displays the Controller setting menu in 16 digits max. • The Main Window area displays the item selected from the main menu.
HOME Printing Operations Auto Low Power Mode Auto Low Power mode enables you to conserve energy by maintaining a lower fixing temperature during periods of printer inactivity. Auto Low Power mode automatically lowers the power after a specified period of printer inactivity as specified in the Key Operator mode. The Auto low power function can be set to 5 minutes/ 10 minutes/ 15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes.
HOME Printing Operations The Counter List This function allows you to view the current status of items shown on the touch panel, such as Total Counter and Counter Start Date. View the Counter List 1 To display the Counter List, press [P (COUNTER)]. 2 After viewing the Counter List, touch EXIT to return to the Basic Screen. Counter List Screen Print the Counter List 1 2 3 4 Press [P (COUNTER)] to display the Counter List Screen. Touch Counter list output. The Basic Screen will be displayed.
HOME Printing Operations Weekly Timer Function When the printer is using the weekly timer function, the TIMER indicator on the right side of the control panel is lit. Important: When the TIMER indicator is lit, the printer will automatically be turned off. Do not turn it off by pressing power switch. Timer Interrupt When the TIMER indicator light is on and other indicators are off, printing is unavailable.
HOME Printing Operations Weekly Timer Function (continued) Timer Interrupt (continued) 1 Enter a 4-digit number Timer Interrupt password using the keypad on the control panel. If an invalid password is entered, enter a valid 4-digit password. Timer interrupt mode Enter password ✻✻✻✻ 2 Press the [START]. Input print time 0 hour(s) 05 minute(s) 3 Enter a 1-digit hour (ex. 3 hour is 3) using the keypad on the control panel. (0 ~ 9) 4 Press [START].
HOME Section 6: Output Modes FS-110/210 Finisher Specifications ...........6-2 Finisher Type...............6-2 Primary (Main) Tray...............6-2 Secondary (Sub) Tray...............6-3 Booklet Tray (FS-210 Finisher only)...............6-3 Cover Sheet Feeder...............6-4 Punching Kit...............6-4 Punching / Z-Folding Unit...............6-4 Non-Sort Mode Using Primary (Main) Tray ...........6-5 Sort Mode Using Primary (Main) Tray ...........6-6 Staple-Sort Mode Using Primary (Main) Tray .......
HOME Output Modes FS-110/210 Finisher Specifications Use only paper that is recommended by Konica and stored under the environmental conditions stated for print quality. Special stock is not guaranteed for reliability or print quality. This Finisher also accommodates wide paper sizes in addition to the standard sizes described below. See p. 4-5 ~ p. 4-7 for details.
HOME Output Modes FS-110/210 Finisher Specifications (continued) Secondary (Sub) Tray • • • • Non-sort and face down exit Non-sort and face up exit Group and face down exit Group and face up exit ❒ Paper size: 11"x17"~5.5"x8.5" ❒ Paper weight: 16~24 lb ❒ Paper capacity for 20 lb: 200 sheets Booklet Tray (FS-210 Finisher only) • Folding Mode ❒ ❒ ❒ ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R (8.27"x11.
HOME Output Modes FS-110/210 Finisher Specifications (continued) Cover Sheet Feeder ❒ Paper size: Lower tray; 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69", 210 mm x 297 mm) Upper tray; 8.5"x11", 8.5"x11"R, 5.5"x8.5 ❒ Paper weight in cover sheet mode: 13~110 lb (200 g/m2 thick paper) ❒ Paper weight in manual staple: 16~24 lb Punching Kit • Punch Mode (available in combination with Primary (Main) Tray output modes) ❒ ❒ ❒ ❒ ❒ Paper size: 11"x17", 8.
HOME Output Modes Non-Sort Mode Using Primary (Main) Tray The Non-sort mode simply means that the offset-stacker finisher modes are not selected. Prints will be stacked upon exit without being offset by sorted sets. With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets FACE DOWN in the proper order. ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5" ❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5" 3,000 sheets 8.5"x11", 8.5"x11"R (FS-110) 2,500 sheets 8.
HOME Output Modes Sort Mode Using Primary (Main) Tray Use this mode when you want to output multiple prints of the original set, and have each sorted set offset upon exit. The staple mode can be selected with the sort mode. With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets FACE DOWN in the proper order. ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R ❒ Paper capacity for 20 lb: 500 sheets 5.5"x8.5" 3,000 sheets 8.5"x11", 8.
HOME Output Modes Staple-Sort Mode Using Primary (Main) Tray Use this mode when you want to offset and staple each printed set. Stapling position and number of staples (1 or 2) can be designated. Each finished set will be offset from the next printed set. With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets FACE DOWN in the proper order. ❒ Stapled paper at 1 position: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" (5.5"x8.5" is available in portrait orientation only.
HOME Output Modes Folding and Stapling & Folding Modes The Folding and Stapling & Folding modes are available only when the FS-210 Finisher option is installed. When any stapling and folding mode is selected, the Booklet feature is automatically selected. NOTE: When printing dark data or using Reverse Image mode together with Folding or Stapling & Folding mode, the folded line of the output prints may be slightly shifted.
HOME Output Modes Punch Mode The Punch mode is available only when the PK-110/120 Punching kit or PZ-108 Punching/ Z-Folding unit option is installed on the FS-110/FS-210 finisher. If both PK-110/120 Punching kit and PZ-108 Punching / Z-Folding unit are installed in the machine, the PZ-108 Punching / Z-Folding unit is used.
HOME Output Modes Z-Folding Mode The Z-Folding mode is available only when the PZ-108 Punching / Z-Folding unit option is installed on the FS-110/FS-210 Finisher. When the Z-Folding mode is selected in combination with any of the Primary (main) tray output modes, the print data is printed on 11"x17"/8.5"x14" print paper and output to the Primary (main) tray of the finisher according to the selected output mode. ❒ Folding type: Z-folding (11"x17"), double-folding (8.5"x14") ❒ Print paper size: 11"x17", 8.
HOME Output Modes Three-Folding Mode The Three-Folding mode is available only when the FS-210 Finisher option is installed. In this mode, the print data is printed on 8.5"x11"R print paper and output to the Booklet tray of the finisher. Z Print paper size: 8.5"x11"R, A4R (20 lb paper recommended) Max. number of folded sheets (20 lb Bond): 3 sheets Paper weight: 16~24 lb; Special stock (20 lb paper is recommended) Booklet tray capacity: 50 sets max.
HOME Output Modes Cover Sheet Feeder The Cover Sheet Feeder (PI-110) is available as an option on the FS-110/210 finisher. Load cover sheet paper into this device and use the sheets as front covers for printed sets output to the Main tray or use the sheets as booklet-type covers for printed sets output to the Booklet tray in the Folding or Stapling & Folding mode. NOTES: • Paper loaded into the cover sheet feeder cannot be printed.
HOME Output Modes Manual Finishing The Manual Finishing function is available only with the Cover Sheet Feeder option (PI110) installed on the FS-110/210 Finisher. To use this convenient function, simply place a set of paper into the lower tray of the cover sheet feeder, select the desired mode from the Manual Finishing operation panel located on the top of the finisher, then press the Start/ Stop button. Available finishing modes according to the optional configuration are described below.
HOME Output Modes Manual Finishing (continued) Specifications for Manual Stapling & Folding mode ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4, A4R (8.27"x11.69", 210 mm x 297 mm) ❒ Paper weight: 16~24 lb (20 lb paper is recommended) ❒ Staple capacity: 20 sheets max. (20 lb paper) 19 sheets max. (20 lb paper with a thick paper cover) ❒ Output tray: Booklet tray Specifications for Manual Three-Folding mode ❒ ❒ ❒ ❒ Paper size: 8.5"x11"R, A4R (8.27"x11.
HOME Output Modes Manual Finishing (continued) 1 Place a set of paper to be finished into the lower tray of the cover sheet feeder, as described below for each mode, then align the guide plate. The indicator light of Start/Stop button will turn green.
HOME Output Modes Output Mode for Machine without Finisher This section describes eight output modes for a printer without the Finisher.
HOME Section 7: Web Utilities To Use Web Utilities ...........7-2 Machine Information Mode ...........7-4 Job Status Mode ...........7-5 Environment Setup Mode ...........7-6 To Set E-Mail Transmission Function...............
HOME Web Utilities To Use Web Utilities When the machine is connected to a PC over a network, a web browser on the PC provides the following functions. 1 Main Page Displays the job in progress, service call, and machine information. 2 Job Status Displays the current and previous job status. 3 Environment Setup Performs the Key Operator setting concerning network environment. Browser: Internet Explorer 5.0 / Netscape 4.
HOME Web Utilities To Use Web Utilities (continued) Web Utilities Window The Main Page informs you of the current job status of the machine and the maintenance item, if required. • • • • • • • Service call JAM Paper supply Toner supply Staple cartridge supply Dispose of Punch trash basket PM call NOTES: Click on [REFRESH] in the Web Utilities window to update the information.
HOME Web Utilities Machine Information Mode Follow the procedure below to display the machine information using the web browser. Web Utilities Window 1 Open the Web Utilities window. NOTE: See p. 7-2 for detailed procedure to access the Web Utilities. 2 Click on the Force 65 image. The window now provides the paper tray configuration, engine configuration, and option information. NOTES: • The same information will be provided also in the Job Status window. See p. 7-5.
HOME Web Utilities Job Status Mode Follow the procedure below to display the current job status, job list including reserved jobs and job information, and information on up to 16 previous jobs. Web Utilities Window 1 Open the Web Utilities window. NOTE: See p. 7-2 for detailed procedure to access the Web Utilities. 2 Click on [Job Status]. The current job status, number of jobs in waiting, and remaining time to elapse before completing the print job.
HOME Web Utilities Environment Setup Mode To Set E-Mail Transmission Function Perform the setting concerning the network environment using the web browser. Web Utilities Window 1 Open the Web Utilities window. NOTE: See p. 7-2 for detailed procedure to access the Web Utilities. 2 Click on [Environment Setup]. 3 Display the E-Mail Transmission Setting window. Enter the 4-digit Key Operator password, then click on [Apply]. Click on [E-Mail transmission setting].
HOME Section 8 : Maintenance & Supplies Loading Paper ...........8-2 Paper Indicator ...............8-2 Paper Empty Indicator...............8-2 Using the HELP Key...............8-2 Loading Paper in Tray 1 and 2...............8-3 Loading Paper in Tray 3...............8-4 Loading Paper in Multi-Sheet Bypass Tray...............8-5 Loading Paper in LCT (LT-402/LT-412)...............8-6 Loading Tabbed Sheets in Tray 1, 2, or 3...............8-7 Loading Tabbed Sheets in Multi-Sheet Bypass Tray...............
HOME Maintenance & Supplies Loading Paper Paper Indicator ( ) A paper indicator always appears on the tray key of the Basic Screen to indicate the paper level. Paper Empty Indicator ( or ) The Paper empty indicator flashes on the tray key of the Basic Screen when a tray is empty. Add paper to the tray when the Paper empty indicator is flashing.
HOME Maintenance & Supplies Loading Paper (continued) Loading Paper in Tray 1 and 2 When Thick or Thin is displayed on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur. When TAB is displayed on the tray key of the Basic Screen, see p. 8-7. 1 Withdraw tray 1 or 2, and open the paper feed roller. 2 Place paper on the tray with the curl side turning up. Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R or 5.5"x8.
HOME Maintenance & Supplies Loading Paper (continued) Loading Paper in Tray 3 When Thick or Thin is displayed on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur. When TAB is displayed on the tray key of the Basic Screen, see p. 8-7. 1 Withdraw tray 3, and open the paper feed roller. 2 Place some paper in the tray with the curl side turning up. Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R or 5.5"x8.
HOME Maintenance & Supplies Loading Paper (continued) Loading Paper in Multi-Sheet Bypass Tray The Multi-sheet bypass tray can be used to stack regular 13 lb~110 lb Bond paper. When loading tabbed sheets in the Multi-sheet bypass tray, see p. 8-8. ❒ ❒ ❒ ❒ Bypass tray paper size: 11"x17"~5.5"x8.
HOME Maintenance & Supplies Loading Paper (continued) Loading Paper in LCT (LT-402/LT-412) When Thick or Thin is displayed on the tray key of the Basic Screen, be sure to load the specified paper; otherwise mishandled paper may occur. When TAB is displayed on the tray key of the Basic Screen, see p. 8-9. 1 2 3 4 Open the LCT top door. Press the paper loading button to lower the LCT bottom plate. Load the fixed size paper into the LCT with the paper curl turning downward.
HOME Maintenance & Supplies Loading Paper (continued) Loading Tabbed Sheets in Tray 1, 2, or 3 Load offset tabbed sheets so that the tab extensions are on the left at the rear (not front) of the tray. The tab extension width should be 0.5" (12.5 mm) or less. When loading tabbed sheets in the tray, be sure to specify the paper type as TAB in the Key Operator mode; otherwise mishandled paper may occur. The top sheet is designated face down as the first tab of the finished set.
HOME Maintenance & Supplies Loading Paper (continued) Loading Tabbed Sheets in Multi-Sheet Bypass Tray Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. The top sheet is designated face up as the first tab of the finished set. Subsequent offset tab sheets follow in sequence. The tab extension width should be 0.5" (12.5 mm) or less.
HOME Maintenance & Supplies Loading Paper (continued) Loading Tabbed Sheets in LCT (LT-402/LT-412) Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. The tab extension width should be 0.5" (12.5 mm) or less. When loading tabbed sheets in the tray, be sure to specify the paper type as TAB in the Key Operator mode; otherwise mishandled paper may occur. The top sheet is designated face up as the first tab of the finished set.
HOME Maintenance & Supplies Adding Toner CAUTION Keep toner cartridge away from children. Although the toner is non-toxic, do not inhale it or allow it to enter your eyes. If toner comes in contact with eyes, please consult your physician. When toner supply is low, the message “Please add toner” displays on the touch screen. NOTE: Use the toner cartridge of the same number as the number described on the label of a toner access door inner side, otherwise the machine trouble may occur.
HOME Maintenance & Supplies Inserting a New Staple Cartridge into FS-110/210 Finisher Use only the staples supplied by Konica. Contact your service representative to reorder. 1 2 2 1 1 2 3 4 5 Open the Finisher door. Pull out the stacker unit by holding the stacker unit handle. Pull up the cartridge housing, then remove it while sliding it along the stapler rail. Remove the empty cartridge from the cartridge housing. Insert the new cartridge into the housing.
HOME Maintenance & Supplies Empty Trash Basket of PK-110/120 Punching Kit When the trash basket becomes full, “Trash basket of Punching kit is full / Please empty trash basket” message displays on the touch screen. PK-110 PK-120 1 Open the Finisher door and withdraw the trash basket. 2 Empty the trash basket. 3 Return the trash basket to its original position, then close the Finisher door securely.
HOME Maintenance & Supplies Empty Trash Basket of PZ-108 Punching / Z-Folding Unit When the trash basket becomes full, “Trash basket of Punching unit is full / Please empty trash basket” message displays on the touch screen. 1 Open the Punching / Z-Folding unit front door with the Finisher door and withdraw the trash basket. 2 Empty the trash basket. 3 Return the trash basket to its original position, then close the Punching / Z-Folding unit front door securely.
HOME Maintenance & Supplies Preventive Maintenance After a set number of prints have been made on your printer, Preventive Maintenance (PM) will be required for maintaining optimal performance. When preventive maintenance is due, a message will prompt you to contact your service representative for maintenance. Reading the PM Counter Control Panel CHECK Counter List Screen HELP COUNTER CLEAR QTY. 1 Press [P (COUNTER)] to display the Counter List Screen.
HOME Maintenance & Supplies Service, Repairs, Supplies Service Enter the name and telephone number of your service representative, plus the machine serial number in the space provided below: (Service Representative) (Tel. No.) (Machine Serial No.) Repairs When calling for repairs, be sure to have all necessary information at hand, such as the machine serial number and your own telephone number.
HOME Maintenance & Supplies Clearing Mishandled Paper Jam Location Screen CAUTION: When removing mishandled paper, be sure to leave no torn paper inside the machine, avoid touching the drum or scratching it in any way, and keep all metal and magnetic objects, e.g., watches, jewelry, etc. away from the drum area. When mishandled paper occurs, the JAM location shown below in Screen 1 indicates which job has the Jam.
HOME Maintenance & Supplies Printing Hints PRINTER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fully insert paper trays. Close Front doors and Toner access door of main body. Close Finisher door. Check to be sure main power switch is ON. Check to be sure power plug is firmly inserted in electrical socket. PRINT IMAGE IS TOO LIGHT Check toner indicator and add toner, if required. Check paper for dampness. Do not leave paper in printer when humidity is high.
HOME Maintenance & Supplies Printing Hints (continued) CALL FOR PM IS DISPLAYED IN MESSAGE AREA Contact your service representative for Preventive Maintenance. FINISHER STAPLE RESULT IS NOT AS EXPECTED The 2 staple position functions only on print paper that is loaded vertically (portrait style). PRINTS SKEW IN THE STAPLED SETS Check to see if print paper is excessively curled in the tray. Reload the print paper upside down.
HOME Section 9 : Key Operator Mode To the Key Operator ...........9-2 How to Access the Key Operator Mode...............9-3 Function Menu Map ...........9-4 System Initial Setting [1] ...........9-6 Date & Time Setting [1]...............9-6 Language Select Setting [2]...............9-8 IP Address Setting [3]...............9-9 ECM (Electronic Copy Monitor) Function Setting [4] .........9-10 How to Access the ECM Setting Mode.............9-11 E.C.M. Data Edit [1].............9-12 E.C.M.
HOME Key Operator Mode To the Key Operator The Key Operator is trained to handle all special Key Operator functions that are not accessible to the general user, such as monitoring overall printer activity, machine performance, and service information, modifying machine settings as well as controlling user activity for billing purposes. A unique 4-digit Key Operator password is normally set by your service representative at installation.
HOME Key Operator Mode To the Key Operator (continued) How to Access the Key Operator Mode 1 Press the [HELP] button on the Control panel to display the Help Screen. 2 Touch the Key Operator Mode on the Help Screen. The Key Operator Password Entry Screen displays when the 4-digit Key Operator password is set by your service representative. Otherwise, the Key Operator Mode Screen displays without the password requirement.
HOME Key Operator Mode Function Menu Map FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS [1] System initial setting [1] Date&Time setting: [Present time; Setting time; Summer time ON/OFF; Difference in time] [2] Language select setting: [American English] [3] IP address setting: [IP address; Subnetmask; Gateway address; Line speed] [4] E.C.M. Function setting [1] E.C.M. data edit: [Change; Add; Delete; Count reset] [2] E.C.M. all count reset: [YES; NO] [3] E.C.M.
HOME Key Operator Mode Function Menu Map (continued) FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS [14] Machine management list print [1] [2] [3] [4] Job memory list User management list E.C.M. management list Font pattern list [15] Call remote center [1] [2] [3] [4] [5] [6] Call for JAM concerns Call for SC concerns Toner bottle supply call Paper supply call Call for Image quality Call for others [16] Side 2 lens adjustment [---, -0.1 %, -0.2 %, -0.
HOME Key Operator Mode System Initial Setting [1] Set the following initial conditions of the printer. • Date & Time setting: Current date and time, Summer time, Time difference • Language select setting: Language used in LCD (English) • IP address setting: IP address for Web Utilities access Date & Time Setting [1] Set the current date and time, the summer time, and also the time difference.
HOME Key Operator Mode System Initial Setting [1] (continued) Date & Time Setting [1] (continued) 5 The Difference in time setting is provided in order to give the time difference information at the same time when E-mail is received. To set this function, follow the procedure below. (1)Touch Diff. time setting to display the Difference in Time Setting Screen. (2)Touch +↔– to display “+” when the local time is earlier than the Universal time, or “–” when the local time is later.
HOME Key Operator Mode System Initial Setting [1] (continued) Language Select Setting [2] Select the language used in the LCD (English). ❒ Default setting: American English System Initial Setting Menu Screen Language Selection Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. NOTE: If an invalid password is entered, enter the valid 4-digit password.
HOME Key Operator Mode System Initial Setting [1] (continued) IP Address Setting [3] When using the server function, this setting is required to enable a PC to gain access to this machine. NOTE: Consult your network manager to perform this setting. Incorrect setting may cause a trouble with other network systems.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] This function can only be accessed by the Key Operator after an 8-digit ECM master key code is entered. The Electronic Copy Monitor allows you to monitor all printing activity by controlling ECM password accounts. This feature can track printer usage for individual users and/or accounts as well as limit printer access to only authorized users. Print quantity limits for specific accounts can also be set.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) How to Access the ECM Setting Mode Key Operator Mode Screen ECM Master Key Code Screen ECM Setting Menu Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) If the Key Operator password is not valid, check with your service representative. 2 Touch [4] E.C.M. function setting.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] Use this setting to display the list of print count and print limit for each account, to change, add, or delete the ECM data, and to reset the print count of the individual account. ❒ ❒ ❒ ❒ ECM No.: Designated by Key Operator ECM Password: Unique 8-digit numeric code programmed by Key Operator for user User Name: Max.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) 2 Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code is required. 3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting Menu Screen. (See note 2.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) To Add ECM Data: (1) Touch Add on the ECM Data Edit Screen. The ECM Data Add Screen will be displayed. (2) Touch the desired item key to highlight it, then enter the data by using the touch screen keypad. Password: 8 digits max. (See note 1.) Name: 8 characters max. (See note 2.) Limit: 999,999 prints max. NOTES: 1 We recommend that you make a list of all ECM passwords and account numbers.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) 5 Touch RETURN on the ECM Data Edit Screen to return to the ECM Setting Menu Screen. If other ECM setting changes are required, touch the desired key, from [1]~[3]. 6 Touch RETURN to restore the Key Operator Mode Screen. 7 Touch RETURN to return to the Basic Screen and perform printing operations.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. All Count Reset [2] Reset the count for all ECM accounts. ECM Setting Menu Screen ECM All Count Reset Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) 2 Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a code is required.
HOME Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Function Setting [3] Use this function to turn ECM On or Off and to select whether the printer will stop at the time the count limit is reached, or after the print job in progress is completed. ECM Setting Menu Screen ECM Function Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen.
HOME Key Operator Mode Paper Type / Special Size Set [6] Use this function to indicate a specific paper type or to specify a special paper size for each tray key on the Basic Screen. This is especially useful when special paper is used on a regular basis and is always placed in a specific paper tray.
HOME Key Operator Mode Paper Type / Special Size Set [6] (continued) 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note.) 2 Touch [6] Paper type / Special size set to display the Paper Type Setting Screen. To specify paper type: (1)Touch the desired paper tray key to highlight it. (2)Touch the arrow keys to select paper type.
HOME Key Operator Mode Panel Contrast / Key Sound Adjustment [7] Use this feature to adjust the level of brightness of the touch screen portion of the control panel, and also the volume of the touch key. Key Operator Mode Screen Panel Contrast/Key Sound Adjustment Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) 2 Touch [7] Panel contrast/Key sound adj.
HOME Key Operator Mode Key Operator Data Setting [8] Use this screen to enter the name and extension number of the Key Operator indicated on the Help Screen that develops from the Basic Screen. ❒ Setting options: 5-digit Key Operator telephone extension; Max. 8-character Key Operator name Key Operator Mode Screen Key Operator Data Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Weekly Timer [9] This function can be accessed only by the Key Operator after a unique 4-digit Weekly Timer master key code is entered. The Weekly Timer is a printer management function that shuts down power to the machine on a daily or hourly basis, and can be programmed specifically for lunch breaks, weekends and holidays, or any time the printer is not required.
HOME Key Operator Mode Weekly Timer [9] (continued) How to Access the Weekly Timer Setting Mode Key Operator Mode Screen Weekly Timer Master Key Code Screen Weekly Timer Setting Menu Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) 2 Touch [9] Weekly timer. The Weekly Timer Master Key Code Screen displays, if a code is required.
HOME Key Operator Mode Weekly Timer [9] (continued) Weekly Timer On/Off Setting [1] Weekly Timer Setting Menu Screen Weekly Timer On/Off Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note 1.) 2 Touch [9] Weekly timer. Enter your 4-digit Weekly Timer master key code, then touch OK to display the Weekly Timer Setting Menu Screen. (See note 2.
HOME Key Operator Mode Weekly Timer [9] (continued) Timer Setting [2] Use this function to set the On/Off times in hours and minutes for each day of the week or set the collective time for the entire week, i.e., the same On/Off time for each day. Weekly Timer Setting Menu Screen Weekly Timer On/Off Time Setting Screen Weekly Timer On/Off Time Collective Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Weekly Timer [9] (continued) Timer Setting [2] (continued) 6 When you open this screen, the ON and OFF times are always set at 00:00~00:00. Touch to highlight the day(s) of the week to be set. More than one can be selected at a time. Enter the ON-time and OFF-time using the touch screen keypad, and then touch SET after each entry.
HOME Key Operator Mode Weekly Timer [9] (continued) Timer Action On/Off Setting [3] Use this function to set the On/Off condition of the printer for a given month. Set the On-Off condition for specific days or collectively, for all Mondays through Sundays of the given month. The default setting is collective: On for Mondays through Saturdays, and Off for Sundays.
HOME Key Operator Mode Weekly Timer [9] (continued) Timer Action On/Off Setting [3] (continued) 6 If any change is made in the collective setting area, the Timer Action Change Confirmation Screen will be displayed. Touch YES to change the timer action, or touch NO to cancel. The Timer Action On/Off Setting Screen will be restored. 7 Touch OK on the Timer Action On/Off Setting Screen to complete the setting and return to the Weekly Timer Setting Menu Screen.
HOME Key Operator Mode Weekly Timer [9] (continued) Lunch Hour Off Setting [4] The Weekly Timer function turns the printer ON and OFF once a day. Use the Lunch hour off function to shut down power during the lunch break and then turn it on again according to the Weekly Timer function setting. Only one off-time interval can be programmed. Weekly Timer Setting Menu Screen Lunch Hour Off Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Weekly Timer [9] (continued) Timer Interrupt Password Setting [5] Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry. Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Control Panel Adjustment [10] Use this feature to check the LCD touch screen and realign the position of touch sensors that may have shifted. Key Operator Mode Screen Control Panel Adjustment Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note.) 2 Touch [10] Control panel adjustment to display the Control Panel Adjustment Screen.
HOME Key Operator Mode Tray Auto Select Setting [11] Select whether the tray size setting will be detected or not detected when ATS/APS functions. If you select sizes to be detected, you may also select the priority of the detection for each tray. Key Operator Mode Screen 1 Key Operator Mode Screen 2 Tray Auto Select Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen.
HOME Key Operator Mode Power Save Setting [12] Select the interval of time that must elapse before Auto Low Power and Auto Shut Off become activated. Auto Shut Off conserves more energy than Auto Low Power. The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting. Key Operator Mode Screen 1 Key Operator Mode Screen 2 Power Save Setting Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Memory Switch Setting [13] This function allows you to change the Memory Settings listed below. See pp. 9-35~9-36 for details on Memory Settings. SW No. No. 09: No. 20: No. 21: No. 22: No. 23: No. 24: No.
HOME Key Operator Mode Memory Switch Setting [13] (continued) 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note.) To display menus [11] to [20] of the Key Operator Mode Screen, touch the Lower arrow key. 2 Touch [13] Memory switch setting to display the Memory Switch Setting Screen. 3 Use the procedure below to select the desired item and change the setting.
HOME Key Operator Mode Memory Switch Setting [13] (continued) [29] Arrow key change (Image Shift) Select the 1 step unit of the touch key to specify the shift amount in Image shift. [33] Key click sound (No paper/JAM) Select the duration of the buzzer that alerts when the machine is out of paper or when paper has misfed. [37] Trimmer (STD/ Non STD size) (Function invalid) Set the machine to allow trimming the folded or stapled & folded sheets in non-standard size (or wide size).
HOME Key Operator Mode Machine Management List Print [14] Use this function to print out the list selected from the following items. • User management list: Home position settings selected by user • E.C.M. management list: Machine information managed by ECM • Font pattern list: Font patterns used in the machine Key Operator Mode Screen 2 Management List Print Menu Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
HOME Key Operator Mode Call Remote Center [15] When activated, the Remote Diagnostics option is automatically monitored by your service representative. In case of machine trouble, select the Call Remote Center option. Your service representative will contact you to determine the appropriate means for resolving the problem.
HOME Key Operator Mode Side 2 Lens Adjustment [16] Use this function to set the adjustment data of the magnification ratio for each tray as Side 2. Key Operator Mode Screen 2 Side 2 Lens Adjustment Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note.) To display menus [11] to [20] of the Key Operator Mode Screen, touch the Lower arrow key.
HOME Key Operator Mode Finisher Adjustment [17] Use this mode to make fine adjustments to each function of the finisher.
HOME Key Operator Mode Finisher Adjustment [17] (continued) Punch Unit Vertical Position Adjustment Screen Z-Folding Position Adjustment Menu Screen 1st Folding Position Adjustment Screen 2nd Folding Position Adjustment Screen Three-Folding Position Adjustment Screen 2 Positions Staple Pitch Adjustment Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter the 4-digit Key Operator password, then touch OK to display the Key Operator Mode Screen. (See note.
HOME Key Operator Mode Key Operator ECM Form No. Password Count/Limit 9-42 Key Operator Mode No.
HOME Index Index 1
HOME Index Numerics 1 SHOT indication time 9-35 A ABNORMAL CONDITIONS 2-8 ADAPTERS AND PLURAL LOADS 2-7 Adding Toner 8-10 Arrow key change (Image Shift) 9-36 Auto Low Power Mode 5-15 Automatic tray switching 9-35 B Backlight contrast 9-20 Basic Screen 5-3 Booklet mode outlet 3-9 Booklet tray 3-9 Bookmark function 9-36 Browser 7-2 Buzzer volume 9-20 C Call Remote Center 9-38 Canadian Department of Communications Regulations 2-5 Cartridge housing 3-10 CAUTION 2-2 CHANGE SETTING key 5-12 CHECK key 3-16 Che
HOME Index J Jam Location Screen 8-16 JAM Position Indication key 8-16 JOB Control area 5-3 JOB DELETE key 5-9 Job offset operating 9-35 JOB PRIORITY key 5-8 Job Status Mode 7-5 K Key click sound 9-35 Key click sound (No paper/JAM) 9-36 Key counter 3-6 Key Operator Data Setting 9-21 Key Operator ECM Form 9-42 KEY OPERATOR MODE key 5-6 Key Operator Mode Screen 9-2 Key Operator Password 3-4, 9-2 Key Operator Password Entry Screen 9-2 Keypad 3-16 Konica Force 65 Overview 3-2 L Label Locations 2-3 Language S
HOME Index R REFRESH 7-3 Remote Diagnostics 9-38 Repairs 8-15 Reservation List 5-5 Right side door 3-6 Routine Safety 2-9 S Secondary (Sub) tray 3-9 Service 8-15 SERVICE MESSAGES 2-9 Service Settings 3-4 SHORT CIRCUIT 2-6 Side 2 Lens Adjustment 9-39 Site Requirements 3-14 Sort Mode 6-6 SPACE ALLOTMENT 2-6 Specifications 3-17 Stacker unit 3-10 Stacker unit handle 3-10 Staple Mode Selection button 6-15 Staple Sheet Capacity 3-4 Staple-Sort Mode 6-7 Stapling & Folding mode 6-8 START key 3-16 Start/Stop butto
HOME
HOME Konica Business Technologies, Inc.
