User manual

Setting up the printer driver

C250P 2-58

5 In Administrator mode of PageScope Web Connection, select “Net-

Ware Setting” from the Network tab, and then specify the following set-

tings.

– IPX Setting: Select “ON”.

– Ethernet Frame Type: Select “Auto Detect”. (Select the frame type

according to the network environment.)

– NetWare Print Mode: Select “Nprinter/Rprinter”.

– Printer Name: Specify the printer name.

– Printer Number: Specify the printer number (0-255). When 255 is

specified, the setting is “Auto”.

6 Restart this machine (turn it off, then on again).

7 Use the NetWare server console to load PSERVER.NLM.

8 Use the NetWare server console to display the print server screen, and

then check that “C250P” (the created printer) is shown as “Waiting for

Job” for the connected printer (0).