User manual

Troubleshooting
8
C250P 8-37
If the punch kit is in-
stalled, pull out the
hole-punch waste
container FN3.1.
6 Return guide FN3 to its original position.
If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
7 Turn dial FN4 to feed the
paper, open the trans-
port unit cover, and then
pull out any paper.
8 Turn dial FN5 or dial
FN6, and then pull out
any paper.
FN3.1
FN4
FN6
FN5