SC-215 User's Manual (D/N: 250-0369-E Version 1.
Trademarks QMS and the MINOLTA-QMS logo are trademark or registered trademark of MINOLTA-QMS, Inc. MINOLTA is a trademark of MINOLTA Co., Ltd. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows and MS-DOS are trademarks of Microsoft Corporation. IBM, PC, AT, XT are registered trademarks of International Business Machines Corp. Other brands and product names herein are trademarks or registered trademarks of their respective holders. Copyright Copy right 2002 by MINOLTA-QMS Inc.
FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
Table of Contents 1. INTRODUCTION.............................................................................. 1-1 2. SC-215 INSTALLATION ................................................................. 2-1 2.1 PRECAUTIONS ............................................................................. 2-1 2.2 UNLOCKING THE SC-215............................................................. 2-2 2.3 CONNECTING THE CABLE ............................................................ 2-3 2.3.
6. USER INTERFACE.......................................................................... 6-1 6.1 SCAN METHOD ............................................................................ 6-1 6.2 DETERMINING YOUR RESOLUTION ............................................... 6-2 6.3 SELECTING A PROPER IMAGE TYPE ............................................... 6-4 6.4 ENHANCING YOUR IMAGE ............................................................ 6-8 6.5 CONTRAST .............................................
8.4 9. HOW TO CLEAR A PAPER JAM .................................................... 8-16 TROUBLESHOOTING .................................................................... 9-1 9.1 9.2 10. QUESTIONS AND ANSWERS ......................................................... 9-1 TECHNICAL SERVICE ................................................................... 9-3 SPECIFICATIONS.....................................................................
1. INTRODUCTION Congratulations on your purchase of a MINOLTA QMS SC-215. The SC-215 produces better printing quality and is freer from maintenance, than traditional copy machines. Its high copy/scan quality, maintenancefree operation and affordability make SC-215 the best convenience copier solution for the office. The following sections introduce the unpacking, hardware and software installation, the operation, and maintenance information to you.
6 2 1 4 3 5 Utilities & Documentation CD Power Adapter/Cord Parallel Cable for Computer Connection Parallel Cable for Printer Connection USB Cable 6. SC-215 1. 2. 3. 4. 5.
2. 2.1 SC-215 INSTALLATION PRECAUTIONS Ÿ Ÿ Ÿ Ÿ Ÿ Keep the SC-215 out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit. Do not install the SC-215 in a humid or dusty place. Be sure to use the proper AC power source. Place the SC-215 securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feeding problems. Retain the SC-215 box and packing materials for shipping purposes.
2.2 UNLOCKING THE SC-215 To protect the scanning head from damage during shipment, the SC-215 is designed with a lock switch beneath the main unit. Therefore, before using the SC-215, it is required that you unlock the SC-215 by moving the lock switch to the Use position.(See Figure 2-1) 1 2 1. “Shipping” Position 2.
2.3 CONNECTING THE CABLE 2.3.1 CONNECTING THE SC-215 TO A PRINTER TO WORK AS A COPIER Connect the power cable and signal cable as shown below.
2.3.
2.4 DOCUMENT PLACEMENT As shown in Figure 2-4, place the document on the glass face (text) down. 2 1 3 4 1. 2. 3. 4. Document Cover Home Position Mark Document Document Glass Figure 2.
3. USING THE SC-215 AS A COPIER To use the SC-215 as a copier, it is recommended that you follow these tips: To use other settings than the one displayed in the Message Display window, simply press the button again for that setting to select other options. Note: (1). An item message in the Message Display Windows ending with a “∗ “ means the current setting. (2). The default settings are: A4, Normal Print Quality, 100% ratio, 1 copy.
3.1 THE CONTROL PANEL 1 4 5 3 2 6 7 8 9 1. Contrast: Used to adjust the copied /scanned image contrast . Increase the level of color contrast with the ( ) button. Decrease the level of color contrast with the ( ) button. 2. Light/Dark: Lighten or darken your image. Increase the level of brightness or darkness with the ( ) button. Decrease the level of brightness or darkness with the ( ) button. 3. Message Display window: Display the current settings. 4. Duplex: Press to automatically duplex print.
15 10 11 12 16 13 17 14 10. Select: Press to determine a printer to be used after updating the printer setting with the Menu button. (Note: It is not necessary to press the Select button for other settings on the Menu button.) 11. Copy Count: Choose the number of copies from 1 to 99. Increase the value of the numeric entries by the ( ) button or decrease the value by the ( ) button. 12. Copy(B/W): Press to start a black-and-white copy . 13.
3.2 BEFORE MAKING COPIES The MINOLTA-QMS SC-215 supports multiple paper sizes from A4/letter to legal on the flatbed and through the Automatic Document Feeder (ADF). The SC-215 also supports enlarging a copy (from letter/legal/A4) to larger sizes (such as A3 and ledger) based upon the printer selected. Check or select the paper size to match your paper supply to ensure smooth operation. To check or select paper size, 1. Press the Menu button and select “Size” item.
3.3 MAKING SIMPLE COPIES The Operating Steps: 1. Place your original face-down on the document glass. 2. Press the Copy button(either Color or Black and White).The Message Window displays “Copying…”, and the Ready LED flashes. 3. Within a few moments, the copying is done. The Message Window then displays “1 Copy @100%” and the Ready LED remains on until the next task.
3.4 MAKING COPIES WITH COPY FEATURES 3.4.1 MIRROR FUNCTION This function allows you to horizontally flip the copied image as if the image were reflected in a mirror. The Operating Steps: 1. 2. 3. 4. Place your document face-down on the document glass. Press the Menu button until the message, “Mirror: off”, appears. Press the or button to display the message, “Mirror: on”. Press the Copy button. The printout shows the original image is flipped horizontally as if it were reflected in a mirror.
3.4.2 ENLARGING OR REDUCING YOUR ORIGINAL Like most copiers, the SC-215 also features an enlargement/reduction function to resize your original. The Operating Steps: 1. 2. 3. 4. Place your document face-down on the document glass. Press the “Reduce/Enlarge” button. The Message Window displays “Ratio:100%”. Press the button again to see more options. For example, if you need 150% enlargement, select “141%” then press the “ ” button to increase the percentage to 150 in 1% increment. Press the Copy button.
3.4.3 CHANGING YOUR COPY DENSITY Copy density refers to the degree of darkness that the MINOLTAQMS SC-215 has reproduced. Use the density feature to compensate for an unsatisfactory original. The Operating Steps: Place your original face down on the document glass. Press the “Lighter/Darker” button. The Message Window displays the default degree of darkness. 3. Press the “Lighter/Darker” button again to select one of the other levels.
3.4.5 CHOOSING YOUR COPY QUANTITY The Operating Steps: Place your original face-down on the document glass. The default copy count is 1. If you need to make 3 copies, for example, press the “Copy Count” button and the Message Window displays “2 copy @100%.” 3. Press the “Copy Count” button again and the Message Window displays “3 copy …”. 4. Press the Copy button. 3 copies will print. 1. 2.
3.4.6 ENHANCING YOUR COPY QUALITY The MINOLTA-QMS SC-215 provides a “Quality mode” option to improve your copy quality. This is particularly useful when the original is a photograph. Quality mode allows your printout to reveal more image (photo) details using a higher resolution. The Operating Steps: 1. 2. 3. 4. Place your document face-down on the document glass. Press the “Normal/Quality” button. The Message Window displays “Normal mode.
3.4.7 ORIGINAL CONTENT MIXED/TEXT/PHOTO COPIES Content can vary widely. The SC-215 can be configured to maximize the copy operation based upon the content of the original. If the original is a photograph or document that contains photographic images with minimal text, select the Photo function to get the best desired output. The Text function optimizes the copy if the original is mostly text.
3.4.8 MAKING COPIES OF A 3D OBJECT The Operating Steps: 1. 2. 3. 4. Place your 3D object on the document glass. Press the “Normal/Quality” button and the Message Window displays “Normal mode.” Press the “Normal/Quality” button again and the Message Window displays “Quality mode.” Press the Copy button. Your 3D object copy is done.
3.4.9 AUTOMATIC POWER SAVING The SC-215 features automatic power saving without unplugging the power cable. If you have not used the SC-215 over a selected power-saving interval (15 minutes, 2 hours, or 4 hours), it automatically switches to power saving status. To resume the ready status, press any one of the buttons on the Control Panel. The Message Window displays “Warming up…” and then “1 Copy @100%,” the ready status. The Ready LED now turns on.
4.
4.1 INSTALLATION PROCEDURE Installation procedures of the SC-215 driver and utilities are as follows: 1. Start Microsoft Windows. 2. Insert the Utilities and Documentation CD-ROM into your CD-ROM drive. 3. The CD-ROM will autolaunch on most systems. However, if your system does not support autolaunching CD-ROMs, from the Start button, choose RUN, type x:\driver\Setup.exe (x: the CD-ROM drive in use), and then choose OK. (See Figure 4-1,4-2) 4.
4.2 DOWNLOADING A PRINTER COLOR TABLE The SC-215 supports up to six color tables simultaneously and has the latest color tables already installed for the following printers: magicolor 2200/2210, magicolor 2200 DeskLaser, magicolor 6100/6110 , magicolor 3100, and magicolor 330. Note: The download utility distributed to the Japanese market excludes three of the six printer color tables.
5). Follow the instructions on the screen to complete installation of the Download Utility and importing all printer color table files to your PC. When all of these installation steps are finished, the SC-215 Download Utility screen pops up, as shown below. Fig. 4.
4.3 TO CUSTOMIZE COLOR TABLES ON SC-215 1). Choose Start>Programs> 3). SC-215 Download Utility> SC-215 Download Utility. The SC-215 Download Utility screen appears as below. If you attempt to load more than 6 color tables to the SC-215, the following warning message appears. Choose one printer model from the right side and click the "Delete" button to delete one table and free some memory. 4). 2).
5). Updating the SC-215’s firmware : When the status bar shows 100%, this means you have successfully downloaded the color table to the SC-215. 6). Connect the SC-215 to your printer and turn on the printer. 7). On the Control Panel of your SC-215, press the ”Menu” button until a printer model like MC2200 is visible. Press the Select key. Use the “ ” or ” ” button until the printer model that the SC215 will be connected to is visible. Press the Select key.
4.4 UNINSTALL THE SC-215 DRIVER You can uninstall the SC-215 driver by selecting Start>Programs>Minolta-QMS SC-215 and clicking the Uninstall driver icon from the SC-215 group.
5. SCANNER OPERATION & DOCUMENT PRINTING 1. Open your TWAIN scanning application. 2. Pull down the File menu and choose Select Source. If the Select Source command is not available in the File menu, see your application’s user’s guide to determine how the TWAIN link is used. A dialog box with a list of scanning sources appears. 3. Select SC-215/32Vx.xx. You need to select the source only once, unless you want to choose another scanner. 4.
6. Select the scanning method you want to use in the Scan Method drop-down menu. 7. Select the mode you want to use for your scans in the Image Type drop-down menu. 8. Select a scanning resolution in the Resolution drop-down menu. 9. Select the settings for the scanning features (for example, Sharpen, Descreen, etc.) that you want to use. 10. Click on the Preview or Scan button to preview or scan your document(s).
6. USER INTERFACE 6.1 SCAN METHOD Select how you want to scan in the Scan Method drop-down menu. Simplex/One-page—use this setting if you are using the automatic document feeder (ADF) to scan a single-page document at a time. Simplex /Multi-page—use this setting if you are using the automatic document feeder (ADF) to scan batches of single-page documents at a time. Flatbed—use this setting if you are using the flatbed to scan one page at a time.
6.2 DETERMINING YOUR RESOLUTION A good control of the resolution results in satisfactory detail of an image that scans. The resolution is measured by dots per inch (dpi). Normally, the greater the dpi number, the higher the resolution and the larger the image file size. Be aware that greater resolution takes more time, memory ,and disk space; therefore, up to a certain degree of dpi, the resolution will not visually be improved. On the contrary, it makes your files more unmanageable.
Tips: 1. For your information, an A4-size color image scanned at 300 dpi at True Color mode consumes approximately 25 MB of disk space. A higher resolution (over 600 dpi) is recommended only when you need to scan a small area at True Color mode. 2. You can also refer to the following table to choose a proper resolution for your image.
6.3 SELECTING A PROPER IMAGE TYPE Select the image type through the mode from the scanner user interface for your own purpose. Each image type is described as follows: Line art (Black and White) LineArt presents the image in black and white only, and there are no intermediate shades of gray in between. That means each pixel of the image is 100% black or 100% white. LineArt is the best choice of image type if you want to scan text, or a pen or ink drawing.
Halftone Halftone simulates gray scale by using different size dots. Particularly when you view the image at a certain distance, it looks very closely like a gray scale image, yet it consumes less disk space. Halftone is the picture that we usually see in newspapers or magazines. Since Halftone is one type of black and white image, the disk space required to save a halftone image is 1/24 of that required to save a 24-bit true color image.
8-Bit Gray A single-channel image consists of at least 256 shades of gray. An 8bit scanner produces a grayscale image with 1024 shades of gray between pure black and pure white. Choose this option if you are scanning black-and-white photographs. With 8 bits of color information per pixel, the file size of an image is eight times larger than a Black and White image and 1/3 the size of a 24-Bit Color image.
8-Bit Color A 8-Bit Color image provides 256 color hues in the image. The file size of a 256 color image is 1/3 the size of a 24-Bit Color image. 8-Bit Color Image 24-Bit Color A 24-Bit Color image consists of three 8-bit color channels. The red, green, and blue channels are mixed together to create a combination of one billion colors which give a more true-to-life quality to the image. Choose 24-Bit Color if you are scanning color photos.
6.4 ENHANCING YOUR IMAGE Brightness: Adjusts the lightness or darkness of an image. The higher the value, the brighter the image.
6.5 CONTRAST Adjusts the range between the darkest and the lightest shades in the image. The higher the contrast, the bigger the different gray scales.
6.6 INVERT IMAGE The invert command reverses the brightness and the color in the image. For color images, each pixel will be changed into its complementary color .
6.7 MIRROR Click on the Mirror button to reverse the image (create a mirror image).
6.8 PREVIEW AUTO-AREA Clicking on the Preview Auto-Area button automatically crops the preview scan area to the previewed document. This will then be the cropping area for all of the scanned documents. 6.9 PAPER SIZE Select a size on the Paper Size list of frequently used scan sizes to perform an immediate selection of your scan size. 6.10 UNITS The Units button indicates the measuring system that is in use (Inch, cm, or Pixel).
6.11 DESCREEN Click on the Descreen button to access a drop-down menu that allows you to specify the type of document you are scanning in order to eliminate the moiré pattern* commonly found in printed matter. You can specify Newspaper, Magazine, or Catalog. Before Descreen After Descreen *Moiré pattern—an undesirable pattern resulting from the incorrect screen angle of the overprinting halftone. 6.
6.13 COLOR ADJUSTMENT Click on the Color Adjustment button to enable the button for the Hue, Saturation, and Lightness feature. NOTE: The Advanced Settings button must be enabled in order to use the Hue, Saturation, and Lightness feature. 6.14 AUTO LEVEL Click on the Auto Level button to add shadow to reveal more details in an image. 6.
Highlight / Shadow This feature is available when 8-Bit Gray, 8-Bit Color, or 24-Bit Color is selected in the Image Type drop-down menu. Highlight refers to the lightest point in a scanned image; shadow refers to the darkest point. Click on the Highlight / Shadow button to access the Highlight / Shadow Levels dialog box. You can type values in the text boxes or you can place the mouse cursor over the line, click the right mouse button, and drag the line to specify the values you want.
Curves When you select the Curves button, a dialog box appears that allows you to adjust the midtone of the image without losing details in the lightest and darkest areas. Select the Curve or Line button, depending on whether you want a curved or an angled setting. Place the mouse cursor over the line, click the right mouse button, and drag the line to set the curve you want.
Color Balance When you select the Color Balance button, a dialog box appears that allows you to adjust the color of the image so that it comes close to that of the original. The default parameters are used to adjust the image. You can type values in the Color Levels text boxes or you can drag the sliding arrow under the color.
Hue /Saturation /Lightness Click on this button to adjust the hue, saturation, and lightness of an image. This button is enabled when the Color Adjustment button is selected. You can type values in the text boxes or you can drag the sliding arrow under each item. Hue—specify a value in the Hue box to adjust the hue up to 360° by clicking on the desired color on the color wheel or selecting a setting on the dropdown menu.
Color Drop-out This feature is available when Black and White, Halftone, or 8-Bit Gray is selected on the Image Type drop-down menu. Click on the Color Drop-out button to access a dialog box that allows you to choose to remove the R (Red), G (Green), or B (Blue) color channel while scanning. For example, if your image contains red text or a red background, choose R channel (red) to remove the red text or red background. This feature is applicable only for black-and-white and grayscale images.
Custom Settings Click on the Custom Settings button to access a dialog box where you can save your scan settings and configuration settings. There are two tabs: Scan Settings and Configuration Settings. Scan Settings The Scan Settings tab allows you to save your scanning feature settings in a file, load an existing file, or delete an existing file. Saving a scan settings file Type a name for your settings in the File Name text box and click on the Save button.
Configuration Settings The Configuration Settings tab allows you to customize some special settings. Energy Saving Mode—check the Enable box to enable energy savings. You can specify a time delay in the Minutes box. Click on the Apply button to save the changes. Hint Setting—check the Show Hints box if you want to have flags that show the name of an item appear when you place the mouse cursor on an item in the dialog box. Click on the Apply button to save the changes.
6.16 MISCELLANEOUS Width : Shows the current image width. Height: Shows the current image height. Size: Shows the current file size of the scanned image. Lock scale Click on this button to fix the output width and height despite the selected scan size. The scale value automatically changes when you apply this option and simultaneously resize the selected area. Information Click on the Information button to access a window that gives you information about the scanner and driver.
Preview: Click on the Preview button to scan a document so you can review the scanned image. This allows you to specify an area to be scanned and any scanning feature settings to be used for future scans. When a scanning feature is changed and applied, the Preview image is updated for a real-time view of the change. You can define the area to be scanned by dragging the cursor lines with the mouse. Zoom view: Click on the Zoom view button to preview a selected area.
6.17 PRINTING Parallel Cable USB Cable Printer Cable To Printer Power Cable To PC Parallel Port To PC USB Port To Power Outlet Figure 5.1 SC-215 Cable Connection Caution: The image scanned to a PC through the SC-215’s USB port can be printed on a printer connected to SC-215 under the condition that the SC-215’s PC parallel port is connected to the PC’s printer port and the printer is connected to the SC-215’s printer port. Do not scan and print at the same time.
7. MAINTENANCE Cleaning: The SC-215 is designed to be maintenance-free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance. Procedure 1. Open the document cover as shown in Figure 6-1. 2. Moisten a soft clean cloth with isopropyl alcohol (95%). 3. Gently wipe the document glass and the white sheet beneath the document cover to remove the dust or any toner particles. 4. Close the document cover. The SC-215 is now ready for use. 1 3 2 1. Document Cover 2.
8. SC-215 AUTOMATIC DOCUMENT FEEDER (ADF) The SC-215 Automatic Document Feeder (ADF) is a convenient addition to your current SC-215. With the ADF, you can automatically copy or scan up to 25 pages at a time. 8.1 INSTALLING THE ADF 8.1.1 UNPACKING THE ADF 1. ADF Document Cover 2. ADF Paper Tray 2 1 3.
8.1.2 INSTALLING THE ADF 1. Turn off your SC-215. Lock the scanning unit on the back. 2. Disconnect the power cable. 3. Remove the document cover by opening the cover and lifting the studs from the hinge holes at the rear of the SC-215. Document Cover Studs Note: Please store the document cover on a flat surface in a safe place. 4. Hold the ADF document cover and insert its studs in the hinge holes at the rear of the SC-215.
5. Insert the notched corners of the ADF Paper Support to the clipjoints on the ADF Paper Tray. Paper Tray Paper Support 6. Insert the notched corners of the ADF Paper Tray into the clipjoints on the ADF document cover.
8.1.3 UNLOCKING THE SC-215 Slide the Lock Switch on the bottom of the SC-215 to unlock the scanning unit. 1 2 1. “Shipping” Position 8-4 2.
8.1.4 CONNECTING THE CABLES 8.1.4.1 Connecting the SC-215 to Work as a Copier Connect the ADF cable, the power cable, and the printer cable (not included),respectively.
8.1.4.2 Connecting the SC-215 to Work as a Scanner Connect the ADF cable, the power cable, the included USB cable for connection to the computer, and the included parallel printer cable respectively.
8.2 USING THE ADF 8.2.1 FANNING PAPER BEFORE USAGE To prevent occasional paper jams when automatically feeding multipage documents, fan the paper before loading. Paper which cannot be properly fed by the ADF: • • • • • • • • • • • Paper with clip or staple attached Paper with ink not totally dry Paper with inconsistent thickness, such as envelopes Paper with wrinkles, curls, folds or tears Coated paper Carbonless paper Paper narrower than 4.5" or wider than 8.
8.2.2 LOADING THE PAPER Place your document with the text face up and the top of the page to the left side as shown below. 123 ABC Feed Direction Top of Page The paper tray capacity is 25 pages. 8.2.3 COPYING & SCANNING WITH THE ADF 8.2.3.1 Copying Multi-page Documents After the installation of the ADF unit is completed and you have properly placed your document on the ADF Paper Tray, press the Copy button on the Control Panel of SC-215.
8.2.3.2 Scanning Multi-page Documents 1. Place your document with the text face up on the ADF Paper Tray. 2. Start your image editing application by clicking the Start button on the task bar and select the name of the application. 3. Choose Acquire from the File menu, and click Select TWAIN Source, for example, please select SC-215 V.X.xx. (The command to open the TWAIN source may vary due to different applications. Please refer to the user manual of your TWAIN application.) 4.
5. Press the Source button to switch the scanning source to Simplex/Multi-page at the TWAIN window. 6. Press the Preview button to get an initial scanned image at a low resolution to allocate your selected scan area. 7. Open the ADF document cover to take out the document and then position it on the first page of the document on the ADF Paper Tray. 8. Press the Scan button on the bottom of TWAIN window or the Scan button on the Control Panel.
8.3 MAINTAINING THE ADF 8.3.1 CLEANING THE ADF The SC-215 is designed to be maintenance free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance. From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case the SC-215 may not feed documents smoothly. If this occurs please follow the cleaning procedures to return your scanner to its original state. The cleaning procedures: 1.
3. Wipe the pad from top to bottom. Be careful not to hook the pick springs. 4. Close the ADF unit. Your SC-215 is now ready for use.
8.3.2 REPLACING THE ADF SNAP-IN PAD MODULE After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended that you replace the pad module with a new one. To order a pad module, please consult your nearest dealer and follow the procedure below to replace it. Disassembly Procedure 1. Gently open the ADF front cover to the left.
2. Press both arms of the ADF snap-in pad module inwardly with your two fingers to pull out the ADF snap-in pad module.
Assembly Procedure 1. Take the new ADF pad module out of its box. 2. Press both arms of the ADF snap-in pad module inwardly with your two fingers. 3. Place it into the holes until it snaps into place.
8.4 HOW TO CLEAR A PAPER JAM In the event of a paper jam, follow the procedures below to remove the paper: 1. Turn the SC-215 off by disconnecting the power cable. 2. Gently open the ADF front cover to the left. 3. Carefully pull the paper out of the ADF unit. 4. Close the ADF front cover. 5. Turn on the SC-215 by reconnecting the power cable. Your SC215 is now ready to use.
9. TROUBLESHOOTING If you have any operational problem, please refer to the following troubleshooting hints. 9.1 QUESTIONS AND ANSWERS Question: Why does the scanned image always come out to be too dark? Answer: 1) Modify the Gamma setting to 1.8 for your monitor and, when printing, set Gamma to 2.2 for your printer. 2) Use the Brightness setting of the TWAIN user interface to get a brighter image. Question: The printer does not print the documents.
Question: Why do not some parallel port devices work with the SC-215? Answer: The SC-215 does support pass-through printing, but the pass-through printing may not work if you connect the parallel port with devices other than printer. Therefore, if you would like to connect some parallel port devices other than printer, please do not connect them to the same parallel port that the SC-215 currently uses. It is suggested that you use other parallel ports to connect these devices.
9.2 TECHNICAL SERVICE Technical support for the SC-215 scanner is provided at the MINOLTA-QMS Technical Assistance Centers.
For all other offices and world wide directories, please visit the corporate web site, www.minolta-qms.com, for contact information. 10. SPECIFICATIONS Optical Resolution 600x600dpi Enhanced Resolution 9600x9600dpi Copy Area Max. 8.5"x 14.
Weight: Flatbed unit: 4.3 kg (9.5 lbs) ADF unit: 1.4kg(3.
Speed 10 PPM (page per minute) (mono mode) Paper tray capacity 25 pages Document size Max: Legal size (8.5” x 14”) Min: 4.5” x 5.5” Document thickness 0.002 “~ 0.
EC Declaration of Conformity According to EN55022 and EN55024 Manufacturer's Name: MINOLTA-QMS, Inc.
