Users Manual
79
1
2
3
4
5
6
7
8
9
10
11
12
3�4 Registration and selection of the DR Detector
By registering to the image processing controller, the
DR Detector can be moved between exposure rooms.
IMPORTANT
• When using ImagePilot as the image processing controller,
it is not possible to move the DR Detector between dierent
exposure rooms.
• Once it is registered in a new exposure room, it will not be
usable in the previous exposure room. When returning to a
previous exposure room, perform the registration operation
again.
3�4�1 Registration with AeroDR
Battery Charger
IMPORTANT
• AeroDR 1012HQ and AeroDR 3 1012HQ cannot be regis-
tered with the AeroDR Battery Charger.
• When an AeroDR Battery Charger exclusively for charge is
used, conrm that the battery charger in the destination has
a "Charge and registration" label.
1
Make sure that all the devices in the desti-
nation exposure room are usable�
2
Insert the DR Detector into AeroDR Bat-
tery Charger in the destination exposure
room�
• Registration process will start.
Exposure
side
3
Oncetheregistrationiscompleted,a
buzzerwillsoundontheAeroDRBattery
Charger,andtheLED(green)willchange
fromslowashingtolit.
LED (green)
4
ConrmthattheDRDetectoriconisdis-
played on the image processing control-
ler�
HINT
• Charging will also start when the DR Detector (AeroDR
1417HQ, AeroDR 1417S, AeroDR 1717HQ, AeroDR 2
1417HQ) is inserted into the AeroDR Battery Charger, and
the AeroDR Battery Charger LED (blue) will light.
• AeroDR 2 1417S, AeroDR 3 1417HD, AeroDR 3 1717HD,
AeroDR 3 1417HD2, and AeroDR 3 1717HD2 can be regis-
tered with the AeroDR Battery Charger.