Manualshelf

Users Manual

ManualsBrandsKONICA MINOLTA ManualsElectronicsSKR 3000
11121314151617181920
1
2
3
4
5
6
7
8
9
10
11
12
Safety precautions
17
CAUTION
• Take the following notes when using the DR Detector:
— Use the DR Detector on a at base. If the DR Detec-
tor is placed on a sloping surface and subjected to a
load, its internal sensor may be damaged.
— When laying the patient onto the DR Detector during
positioning, do so very slowly.
— When placing the DR Detector under the patient as
part of the exposure process, insert and pull out the
detector slowly.
— Use the recommended adapter when you need to
perform exposure on a stretcher or a place where
load is to be applied locally.
— Exposing or immersing the DR Detector to patient
body uids, chemicals, water, etc. may allow such liq-
uids to enter through exterior gaps and cause a fail-
ure. Make sure to cover the DR Detector with a vinyl
sheet, etc.
— Be careful of the ingress of patient body uids, chem-
icals, water, etc., because the AeroDR Detector is not
designed to be waterproof.
— The AeroDR 2 Detector and AeroDR 3 Detector are
designed to have waterproof capabilities, but be care-
ful when handling them because they are not guar-
anteed to be completely waterproof. Also, be careful
because subjecting them to strong impacts or exces-
sive loads by dropping or hitting them against other
objects may diminish their waterproof capabilities.
— Never leave DR Detectors in hot and humid environ-
ments for long periods of time.
— The DR Detector has wireless antennae positioned
at 2 places. Do not block them with the body or metal
because that will interfere with, disconnect or slow
down wireless communication.
— Pressing the power switch on the AeroDR Detector
and AeroDR 2 Detector causes each LED (green,
orange, blue) to light temporarily or ash. After this,
only green begins to flash in a slow cycle. Please
check the lighting or ashing of each color once.
— Pressing the Power SW of the AeroDR 3 Detector
causes the Information LED (white) to ash or light.
After this, the Battery LED (blue) lights. Please check
the ashing or lighting of each color.