Users Manual
40
Component names and functions
2�2�2 AeroDR 2 Detector
(6)
(2)
(7) (8) (9)(5)
(1)
Exposure side
(6)
(4)
(6)
(3)
(3) (5)
(4)
Number Name Functions
(1) Triangular mark
• Indicates the direction to place the DR Detector in during exposure.
— When exposing in portrait, place the triangular mark upward.
— When exposing in landscape, place the triangular mark to the left or right.
— (Left and right are set during installation according to the exposure envi-
ronment.)
(2) Power switch Used to turn the DR Detector on/o.
(3) Antenna display Displays the place where a wireless antenna is attached.
(4) AeroDR Grip sheet attachment areas Indicates the attachment positions for AeroDR Grip sheet use.
(5) Exterior Protects the internal parts.
(6) Protective cover Absorbs external shocks.
(7) LEDs Indicate the status of the DR Detector.
(8) Selection switch
Noties the image processing controller that this DR Detector will be used for
the exposure.
(9) Wired connection connector
Connects to the AeroDR Battery Charger, AeroDR Battery Charger2, and wired
cable.