Users Manual Part 1
1
2
3
4
5
6
7
8
9
10
11
12
43
Component names and functions
2�2�3 AeroDR 3 Detector
(1) (2)
(10) (11)
(7)
(9)
(8)
(12)
(3) (4)
(5)
(5) (6)
Exposure side
Number Name Functions
(1) Power SW Used to turn the DR Detector on/o.
(2) Selection SW
Noties the image processing controller that this DR Detector will be used for
the exposure.
(3) Front board Protects the internal parts.
(4) Triangular mark
• Indicates the direction to place the DR Detector in during exposure.
— When exposing in portrait, place the triangular mark upward.
— When exposing in landscape, place the triangular mark to the left or right.
— (Left and right are set during installation according to the exposure envi-
ronment.)
(5) Antenna Displays the place where a wireless antenna is attached.
(6) Back board Protects the internal parts.
(7) Battery LED
Toggles DR Detector status displays and the modes.
(8) LINK LED
(9) Status LED
(10) Mode LED
(11) Information LED
(12) Wired connection connector Connects to the AeroDR Battery Charger2, and wired cable.
HINT
• AeroDR 3 1417HD, AeroDR 3 1717HD, AeroDR 3 1012HQ, AeroDR 3 1417HL, and AeroDR 3 1417SL have the back board with
a dierent design.