Users Manual Part 2

118
Maintenance and inspection items
Installation procedure
1
Remove the label from the AeroDR Grip
sheeta󰀩xingposition.
• Insert a precision at-blade screwdriver, etc. into the
step at the AeroDR Grip sheet affixing position to
slightly turn the label over, and then remove it com-
pletely.
Label on the AeroDR Grip
sheeta󰀩xingposition
2
Remove dust and contamination from the
AeroDRGripsheeta󰀩xingposition.
AeroDRGripsheeta󰀩xingposition
3
Peel off the center piece of the release
paperfromtheAeroDRGripsheet,and
temporarilya󰀩xthesheettotherequired
position on the DR Detector�
• Place the AeroDR Grip sheet in the correct posi-
tion so that it does not overlap the DR Detector
label.
AeroDR Grip sheet
a󰀩xingposition
Release paper
AeroDR Grip
sheet
4
Peelo󰀨theleftandrightpiecesofthere-
lease paper from the AeroDR Grip sheet
anda󰀩xthesheettotherequiredposition
on the DR Detector�
• Affix the sheet slowly from the center to the
right and left sides to attach it tightly to the DR
Detector.
• Confirm that the AeroDR Grip sheet has been
securely placed.
AeroDR Grip sheet
AeroDR Grip sheet
a󰀩xingposition
5
Repeat the same steps to affix the other
three sheets�