Service Manual

SCANNER SECTION
3-18
III DIS./ASSEMBLY
3.6 Replacing Exposure Lamp
Caution:
• Do not touch the exposure lamp's lamp area
with bare hands.
A. Procedure
1. Remove the RADF.
• For removing procedure, see the DF service
manual.
2. Remove the platen glass.
3. Remove the 4 screws [1], and remove the read
cover/R [2].
4. Shift the exposure unit [1] to the center of the
main body frame.
5. Remove the 2 screws [2], and remove the auxil-
iary reflecting mirror [3].
6. Remove the 1 connector [1] and 2 screws [2].
Tilt and remove the exposure lamp [3].
7. Reinstall the above parts following the removal
steps in reverse.
[1]
[2]
[1]
[1]
[2]
[3]
[1]
[2]
[3]