Service Manual

PAPER FEED UNIT
3-43
III DIS./ASSEMBLY
4. Remove the stop ring [1] and the bearing [2].
5. Remove the 2 screws [3]. Then slide the bypass
feed roller unit [4] to the left side and remove it
from the bypass drive shaft [5].
6. Remove the paper feed roller [1].
7. Remove the 2 stop rings [2] .
8. Pull out the bypass conveyance shaft [3], and
remove the feed roller [4].
9. Reinstall the above parts following the removal
steps in reverse.
Note:
• When reinstalling rollers, pay attention to their ori-
entation.
[1]
[2]
[3]
[5]
[4]
[1]
[2]
[2]
[3]
[4]