Service Manual

I ADJUSTMENT
25 MODE
1-15
3
DIPSW17 7 Separation claw operation
OFF mode (for machines
destined for China)
Normal OFF 0 0 0
DIPSW18 0 Tray 1 (main body upper
stage), separation of defec-
tive part
Normal Not allowed to
use
000
1 Tray 2 (main body lower
stage), separation of defec-
tive part
Normal Not allowed to
use
000
2— ——000
3— ——000
4 Tray 3 (DB upper stage),
separation of defective part
Normal Not allowed to
use
000
5 Tray 4 (DB lower stage),
separation of defective part
Normal Not allowed to
use
000
6 Tray 5 (LT), separation of
defective part
Normal Not allowed to
use
000
7 DB is isolated Normal Not allowed to
use
000
DIPSW19 0 Separation of defective part
of printer controller
Normal Not allowed to
use
000
1 Separation of defective part
of FAX board
Normal Not allowed to
use
000
2— ——000
3 Separation of defective part
of HDD
Normal Not allowed to
use
000
4 Separation of defective part
of ADU
Normal Not allowed to
use
000
5 Separation of defective part
of scanner
Normal Not allowed to
use
000
6— ——000
7 Separation of defective part
of RADF
Normal Not allowed to
use
000
DIPSW No. Bit Functions 0 1 Default values
Japan Inch Metric