Service Manual

I ADJUSTMENT
25 MODE
1-27
1
*
26 Automatic feed of non-standard size originals
in the platen auto start mode
The setting of the automatic selection of auto-
start is available for the memory switch setting
in the key operator mode. When this setting is
in the following condition, a setting can be
made to decide if the paper is automatically
fed from the bypass tray.
• The setting of the automatic selection of auto-
start is on with the original size (platen) detected
as non-standard.
*
27 Printer paper size automatic conversion
The paper size specified by the print job is
automatically changed and output according
to the following standard.
*
29 Switching of the job stop with no process stop
The SW is used to decide if a process stop is
made at the breaks between continuous two
or more jobs reserved.
*
30 Automatic copy reservation function
When this setting is “1”, the copy reservation
screen automatically appears after the end of
the original read operation. Also, the job set-
tings are the same as the settings for the pre-
vious job.
*31 Density setting when the toner save function
is selected in the printer driver screen
When “Toner saving mode” is on in the printer
driver, the print density is set in the range
shown below.
This setting is effective only for the PCL and
PS versions.
*
32 Selection of the transfer/separation output of
the user paper (tray)
This SW is used to set the transfer/separation
output which is applicable when the specified
paper is selected in the “Paper type setting” in
the key operator mode.
Mode 22-1
Auto start does not take place 0
Auto start takes place when the
bypass tray is selected
1
Mode 24-2 24-3
No conversion 0 0
Inch → Metric 0 1
Metric → Inch 1 0
Non (not allowed to
select)
11
Mode 24-7
No process stop 0
Process stop 1
Mode 27-0
Do not use 0
Use 1
Mode 27-7 27-6 27-5
Standard 0 0 0
-4 (Lighter) 0 0 1
-3 0 1 0
-2 0 1 1
-1 1 0 0
+1 1 0 1
+2 1 1 0
+3 (Darker) 1 1 1
Mode 29-2 29-1 29-0
Plain paper (Japan) 0 0 0
Plain paper (Inch) 0 0 1
Plain paper (Metric) 0 1 0
Thick paper 0 1 1
Thin paper 1 0 0
Recycled paper 1 0 1