Service Manual

I ADJUSTMENT
25 MODE
1-39
7.5.2 Copy count by parts to be replaced
(Named; arbitrarily)
Set the limit value for the parts to be replaced, parts
No., parts name setting, copy count display and
count reset.
A. Copy count display and count reset by parts
to be replaced
(1) Procedure
1. Enter the 25 Mode.
2. “25 mode menu screen”
Press the [4. Parts counter ] key.
3. “Parts counter menu screen”
Press the [2. Count of parts (Named)] key.
4. “Copy count screen by parts to be replaced
(named)”
Press the arrow key to select the data to be set
or changed.
5. The following items can be set below:
• “COUNT RESET” : To clear the copy count.
• “LIMIT SET” : To enter the limit value (6-digit).
• “P/N SET” : To enter the parts number (9-digit).
• “Parts name” : To enter the parts name.
6. Press the [RETURN] key, then return to the
“Copy screen by parts to be replaced”.
B. List of parts to be replaced (arbitrarily)
No. Count timing
KRDS
(G0)
00
When copy count (at the paper exit is completed)
00
01
When copy count (at the paper exit is completed)
01
02
When copy count (at the paper exit is completed)
02
03
When copy count (at the paper exit is completed)
03
04
When copy count (at the paper exit is completed)
04
05
When copy count (at the paper exit is completed)
05
06
When copy count (at the paper exit is completed)
06
07
When copy count (at the paper exit is completed)
07
08
When copy count (at the paper exit is completed)
08
09
When copy count (at the paper exit is completed)
09
10
When copy count (at the paper exit is completed)
0A
11
When copy count (at the paper exit is completed)
0B
12
When copy count (at the paper exit is completed)
0C
13
When copy count (at the paper exit is completed)
0D
14
When copy count (at the paper exit is completed)
0E
15
When copy count (at the paper exit is completed)
0F
16
When copy count (at the paper exit is completed)
10
17
When copy count (at the paper exit is completed)
11
18
When copy count (at the paper exit is completed)
12
19 When paper is fed from LT-203 13
20 When paper is fed from by-pass tray 14
21 When paper is fed from tray 1 15
22 When paper is fed from tray 2 16
23 When paper is fed from tray 3 17
24 When paper is fed from tray 4 18
25 When paper is fed from ADU 19
26 When paper is exited from main body 1A
27
When RADF is read (1 count each for front and back)
1B
28
When RADF is read (1 count each for front and back)
1C
29
When RADF is read (1 count each for front and back)
1D