Service Manual
JAM CODE LIST
4-35
IV DIAGRAMS
1
FS-113
J72-17
During operation
• The PS2 (Passage sensor) of RU-101 is
not turned OFF.
• After the PS2 of RU-101 is turned ON,
the PC1 (1st tray exit sensor) is not
turned ON. (Sort/Group)
• After the PS2 of RU-101 is turned ON,
the PC4 (Upper path sensor) is not
turned ON. (Staple)
• After the PS2 of RU-101 is turned ON,
the PC2 (Lower path sensor) is not
turned ON. (Staple/Sort/Group)
• The PC4 is not turned OFF after it is
turned ON. (Staple)
• The PC2 is not turned OFF after it is
turned ON. (Staple/Sort/Group)
• After the PC4 is turned ON, the PC3
(Storage sensor) is not turned ON. (Sta-
ple)
• After the PC2 is turned ON, the PC3 is
not turned OFF. (Staple/Sort/Group)
The FNS/main
body stop
immediately.
Pull out the FNS
from the main body,
and remove
jammed paper, if
any, from the FNS/
main body.
FS-114
J72-17
PC4-FN (Entrance sensor) does not OFF
after specified time from ON.
Open front door and
remove jammed
paper if any.PC5-FN (Transport sensor) does not ON
after specified time from PC4-FN (Entrance
sensor) ON.
FS-113
J72-18
• After the PC1 (1st tray exit sensor) is
turned ON, it is not turned OFF.
• After the PC3 (Storage sensor) is turned
ON, it is not turned OFF.
Pull out the FNS
from the main body,
and remove
jammed paper, if
any, from the FNS/
main body.
FS-114
J72-18
PC5-FN (Transport sensor) does not OFF
after specified time from ON.
Open front door and
remove jammed
paper if any.
FS-112
J72-19
PS702 (FNS entrance sensor) failed to turn
OFF within a predetermined time after turn-
ing ON. (Staple, sort/group)
Remove jammed
paper, if any, from
the FNS/main body.
J72-21
PS707 (No paper sensor) failed to turn OFF
within a predetermined time after PS703
(Paper exit sensor) turning ON. (Small size
staple, sort/group)
Classification
Jam
Code
Causes Resulting
operation
Correction