Service Manual

FIXING UNIT
3-53
III DIS./ASSEMBLY
2
9.2 Replacing the Fixing Heater
Lamp/1 and Lamp/2
Caution:
• Do not touch the lamp area with bare hands.
A. Periodically replaced parts/cycle
• Fixing heater lamp/1: Every 480,000 copies
(7145 only)
• Fixing heater lamp/2: Every 480,000 copies
(7145 only)
B. Procedure
1. Remove the fixing unit from the main body.
2. Remove the screws [1], and remove the 2 cov-
ers/F [2], /R [3].
3. Detach the faston terminal [1] at the rear of each
lamp.
Note:
• The marking “B” is stamped on the hole of the
lamp support piece for the L3 (Fixing heater lamp
/3) [2].
[1]
[1]
[2]
[3]
[1]
[2]