User's Guide

31
RECORD
30
BURST IMAGE CAPTURE
Burst image capture is similar to the motor drive or continuous-drive mode on
conventional cameras. The camera will continuously take pictures while the
shutter-release button is held down. Up to 7 full-size images and 15 1/4 size
images can be captured in one burst at a rate as fast as 3.5 frames/second. See
page 52 to select the burst capture rate.
Images captured together in one Burst are linked together and treated as a series
by the camera when in Play and Review modes.
Turn the camera on and slide the
Mode switch to REC.
Frame the picture as instructed
in “Taking Pictures”, steps 4
through 6.
• The flash does not operate in Burst. The
flash icon over the center soft key will
disappear.
Press the left soft key until
Burst appears in the soft key
label.
• The image capture modes are displayed in
the following sequence.
Burst
Still
Timelapse
TAKING PICTURES - CONT’D
• A message appears asking to confirm
deletion. The Yes and Cancel soft keys will
appear.
Press the Yes soft key.
• The image is deleted and the camera will
return to Live View.
• The Cancel soft key will return the camera
to the Record screen without deleting the
image.
• The image will be saved automatically after
a few seconds if neither button is pressed.
If Delete is pressed:
Continued on next page.