User's Guide

33
RECORD
TIMELAPSE
In Timelapse image capture, the camera will take a series of pictures at regular
time intervals. This feature is useful for capturing events over time, such as the
opening of a flower.
Images captured together in Timelapse are linked together and treated as a series
by the camera when in Play and Review modes.
The default settings for Timelapse capturing are:
Timelapse interval: 60 seconds.
Number of Images: 10 images.
See page 53 to change these settings. The interval can be selected from 1 second
to up to 546 minutes. As many as 200 images can be captured in one Timelapse
series.
Turn the camera on and slide the
Mode switch to REC.
Press the left soft key until
Timelapse appears in the
soft key label.
• The image capture modes are displayed in
the following sequence.
Burst
Still
Timelapse
BURST IMAGE CAPTURE - CONT’D
32
Press
and hold the shutter-
release button all the way down.
• The shutter will continuously release until
your finger is lifted from the shutter-release
button, the memory buffers become full, or
the maximum number of images has been
captured.
• The focus and exposure for the series is
determined when the shutter-release button
is pressed part-way down before the
pictures are taken.
• If the memory buffers are full when the
shutter-release button is pressed, Please
wait... will appear in the overlay bar.
Lift your finger from the shutter-
release button.
• The last image will appear on the LCD
monitor and Save and Delete will appear in
the soft key label.
Press the Save or Delete soft key
as instructed in “Taking Pictures”.
• The entire series will be saved or deleted.
Lift your finger from the shutter-
release button.
• The last image will appear on the LCD
monitor while the series is being written to
memory. Once the images are saved, the
camera will return to Live View.
If Instant Review is OFF:
If Instant Review is ON:
Continued on next page.