User's Guide

111
Connecting to Mac OS 8.6
To download and install this software, follow the instruc-
tion on the Apple web site. Always read the attached
terms and conditions before installing any new software.
To access this camera with a computer with Mac OS 8.6, the USB storage support must be installed
first. This software is supplied by Apple Computer, Inc. free of charge. The latest version can be
downloaded from the Apple Software Updates web site at http://www.apple.com/support.
Auto power save (data-transfer mode)
If the camera does not receive a read or write command within ten minutes, it will shut down to save
power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the com-
puter monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.
Turn off the camera with the mode dial. Remake the USB connection by turning on the camera with
the mode dial.
QuickTime system requirements
IBM PC / AT Compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
2000 Professional, or XP.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
To install QuickTime, follow the instructions in the
installer. Macintosh users can download the lat-
est version of QuickTime free of charge from the
Apple Computer web site: http://www.apple.com.