User's Guide

Close the battery-chamber door (3) and slide it toward the top of

the body (4) to engage the safety catch.

After installing the battery, the set-time/date message may

appear on the monitor. The clock and calendar are set in the

custom 2 section of the setup menu (p. 20).

ETTING UP AND RUNNING

GETTING UP AND RUNNING

Changing the CR-V3 battery

Insert the battery. The CR-V3 battery must be inserted with the

battery terminals first. The flat side of the battery should face the

front of the camera. If the battery does not fit, check its orienta-

tion. Never force the battery.

This digital camera uses one CR-V3 lithium battery. When replacing the batteries, the

mode dial should be in the off position.N.B. Whilst this battery is available in some dig-

ital camera stores we recommend that Ni-MH AA batteries be used. See next section.

Open the battery-chamber door by sliding the door toward the bottom of the cam-

era (1) to release the safety catch; the door can then be opened (2).