User's Guide

The response time during recording and playback is longer with
MultiMediaCards compared with SD Memory Cards. This is not a
defect, but rather due to the specifications of the cards. When using
large capacity cards, some operations like deletion may take longer.
SD Memory Cards have a write-protect switch to prevent image data
from being deleted. By sliding the switch to the bottom of the card,
the data will be protected. However, when the card is protected,
images cannot be recorded. If an attempt is made to record or
delete an image with the camera, the card-locked message will
appear on the monitor. For memory card care and storage see page
123.
Memory cards should not be used to permanently store image data.
Always make a copy of camera files on an appropriate storage device or recording media. Making an
additional backup copy of the data is recommended. Minolta has no responsibility for any loss or
damage to data.
19
If the card-not-recognized message appears, the inserted card in the camera may need to be format-
ted. A card used in another camera may have to be formatted before being used. If the unable-to-
use-card message appears, the card is not compatible with the camera and cannot be formatted. A
card is formatted in the basic section of the setup menu (p. 96). The formatting operation permanent-
ly erases all the data on the card.
Write-
protect
switch
Lock
position
About memory cards