User's Manual

3736
In this mode, the camera continuously takes pictures
and advances the film as long as the shutter-release
button is held down.
1.Press the drive-mode button until the
continous mode symbol appears in the
data panel.
CONTINOUS DRIVE
3.Press the shutter-release button all the way
down.
• will blink in the data panel. The self-timer lamp on
the front of the camera will blink slowly during the
countdown, then rapidly just before the shutter is
released.
• To cancel the self-timer, press the drive-mode button again or turn the camera
off.
• Self-timer is automatically cancelled after the shutter is released.
✎ The camera locks focus on the subject when the shutter-release button is
pressed. Focus hold can be used (p. 20).
SELF-TIMER (CONTINUED)
Continued on next page.
2463_English 2/14/00 1:21 PM Page 36