User's Manual

4544
The remote control uses a 3V lithium battery (CR2032).
When pressing the remote-control buttons does not release
the shutter, the battery must be replaced. (The supplied
battery should be sufficient for approximately ten years of
operation).
1. Pull out the battery chamber and remove the old
battery (D).
2. Insert a new battery into the battery chamber with
its plus side up (E).
3. Slide the battery chamber back into the remote
control.
CHANGING THE BATTERY
D
E
4.Point the remote control toward the front of the camera, press
either the Release button (•) or Delay button (2s).
• After the picture has been taken, focus will remain locked. To cancel focus
hold, turn the camera off, or operate the zoom lever.
IR REMOTE CONTROL RC-3 (SOLD SEPARATELY)
2463_English 2/14/00 1:21 PM Page 44