Operation Manual

* The selftimer is cancelled each time a photo-
graph is taken; therefore, to continue using the
selftimer, it is necessary to press the selftimer
button again.
* The timer operating time can be set to either
10 sec. (initial setting) or 3 sec. in the setup
mode.
Image Quality Mode (QUALITY)
The image quality mode button is used to select
any of four qualities of image data for photographs.
The currently selected quality can be checked
using the data display panel.
1. Set the mode select dial to Photo (
).
Note:
* When the power is already turned on with Play-
back (
) or set up (SET UP), set the mode
select dial to Photo (
) to cancel these two
modes and open the lens cover automatically.
2. Press the power button.
The lens cover will open automatically.
3. Press the image quality
mode button.
Each time the image qual-
ity mode button is pressed,
the data display will
change as follows.
[FINE] (Initial setting) ②
[SUPER FINE] ①
[ECONOMY] ④
[BASIC] ③