Operation Manual

4. Press the menu button once to enable mode
selection (“Set Camera Exposure” setting
screen).
The “Set Camera Exposure” icon is highlighted
in the upper left corner of the LCD monitor
screen, with the through image appearing still.
5. Press the Set/Zoom button once. The exposure
adjustment bar will appear at the bottom of the
screen. Standard exposure is with the cursor in
the center of the bar.
6. Press the select buttons (
, ) to adjust the
exposure.
* Press the
button to set exposure to the
minus side and darken the image. Use with
colors with low intensity to enhance the effect.
* Press the
button to set exposure to the plus
side and brighten the image. Use to adjust the
exposure with backlighting.
7. Press the Set/Zoom button to return to the
through image.
The through image will be displayed showing
the effects of the exposure compensation.
To change the exposure again, press the menu
button, press the Set/Zoom button and repeat
steps 6 and 7.
Notes:
* All exposure compensation values will return to
the initial settings when the power is turned off
and then on again.
* Any differences may be difficult to detect after
exposure compensation when the subject is in
a dark place.
In such cases, take several photographs with
different exposure compensation settings and
select the most suitable image by displaying on
a TV set or personal computer screen.