User Manual
5
7. LED indicator
Pairing the Bluetooth device
LED indicator Status of the headset
Red and blue LEDs blink alternately Pairing mode
Blue LED blinks twice every 2 seconds Standby mode (not connected with the Bluetooth device)
Blue LED blinks twice every 5 seconds Standby mode (connected with the Bluetooth device)
Blue LED blinks 3 times every second Ringing
Blue LED blinks every 2 seconds Conversation mode
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the product
to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for these
products.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTI ON