Operation Manual

Description alarm:
1. Siren
2. Switch for alarm/chime
3. Mounting hole
4. AC Adapter Socket
5. Battery Compartment
Battery Installation:
1. Slide the cover off from the backside of the alarm.
2. Insert 3x AA batteries in the battery compartment following the
polarity diagram inside of the battery compartment. Replace the
cover.
Switch for alarm/chime:
Chime Position: a chime sounds 3 times each time
motion is detected.
Alarm Position: an alarm sounds continuously when
motion is detected. Alarm will automatically turn of after
+/- 30 seconds.
Off Position: no signal will sound when motion
detected.
Placement of the alarm:
The alarm can be placed anywhere within 15~20m range of the PIR
sensor.
Alarm operation:
The PIR sensor will automatically activate the alarm when
movement is detected in the secured area. When activated, the
alarm will sound.
Settings:
The system has 3 selectable built-in security codes. Therefore it’s
possible to use up to 3 systems in one area. You may change the
codes to prevent interaction when using more than one pair of
systems.