ENGLISH 1. Introduction: LCD/TFT monitor for observation and security. Improved LCD panel for 24-hour CCTV systems. High stability pictures and clear colours. Advanced circuits for a better capability to deal with the video signal and reduce interference on the monitor. Equipped with a VGA connection. Description - front: MENU Enter MENU Select options － Decrease value Auto Auto adjust (Escape MENU) Select settings in MENU Power Green, monitor ON Red, monitor Standby ＋ Increase value 2.
2.1 Colour: Select “COLOUR” and press “MENU” to confirm. The following screen will appear showing the display settings. Contrast: This setting is used to change the contrast between the black and white areas of the image. Clear resolution of the white, black and grey scales can be obtained by correctly setting the contrast. Press “＋” or “－” to increase or decrease the parameter settings. Brightness: This setting is used to change the brightness of the image according to any ambient light.
2.2 Image setting: Select “PICTURE” and press “MENU” to confirm. The following screen will appear showing the display settings. H.Position: This setting is used to move the image left and right. “－” moves the screen image left. “＋” moves the screen image right. V.Position: This setting is used to move the picture image up and down. “－” moves the screen image downward. “＋” moves the screen image upward. Phase: This setting is used to minimize distortions and video instability.
2.3 Function: Select “FUNCTION” and press “MENU” to confirm. The following screen containing settings related to image dimensions and position of the image on the screen will appear. Auto adjust: This setting is used to automatically adjust the video setup. Press “＋” or “－” to select the parameter settings. Auto colour: This setting is used to automatically adjust the colours of the image. Press “＋” or“－” to select the parameter settings. 2.4 OSD Menu: Select “OSD MENU” and press “MENU” to confirm.
Language: This setting is used to select the language of the controls. Press “＋” or “－” to select between the available options. OSD H. Pos: This setting is used to change the horizontal position of the OSD panel. Press “＋” to move the image to the right. Press “－” to move the image to the left. OSD V. Pos: This setting is used to change the vertical position of the OSD panel. Press “＋” to move the image upward. Press “－” to move the image downward.
Specifications: • Panel size: 19” (48 cm) TFT LCD • Response time: 6 ms • Resolution: 1280x1024 • Brightness: 450 cd/m2 • Contrast ratio: 700:1 • Screen life span: 50.000 hours (intensive use) • Viewing angle: 170° • System: PAL/NTSC • Inputs: VGA • Power: DC 12 V, 5 A • Dimensions: 41x42x5.20 cm (including stand) Installation precautions: • To prevent overheating of the monitor, put it in a position which allows the flow of air through the slots in the casing.
Warranty: No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product. General: Designs and specifications are subject to change without notice. All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such. Keep this manual and packaging for future reference. Use only the provided AC/DC adapter. Attention: This product is marked with this symbol.
