Operation Manual

2.1 Colour:
Select “COLOUR” and press “MENU” to confirm. The following screen will appear
showing the display settings.
Contrast:
This setting is used to change the contrast between the black and white areas of the image.
Clear resolution of the white, black and grey scales can be obtained by correctly setting
the contrast. Press “＋” or “－” to increase or decrease the parameter settings.
Brightness:
This setting is used to change the brightness of the image according to any ambient light.
Press “＋” or “－” to increase or decrease the parameter settings.
Colour temperature:
This setting is used to adjust the colour temperature. Press “＋” or “－” to select the
desired value.
Colour adjust:
This setting is used to enter the sub-menu of colour adjustments.