Operation Manual

2.2 Image setting:
Select “PICTURE” and press “MENU” to confirm. The following screen will appear
showing the display settings.
H.Position:
This setting is used to move the image left and right. “－” moves the screen image left.
“＋” moves the screen image right.
V.Position:
This setting is used to move the picture image up and down. “－” moves the screen image
downward. “＋” moves the screen image upward.
Phase:
This setting is used to minimize distortions and video instability. Press “＋” or “－” to
increase or decrease the parameter settings.
Clock:
This setting is used to minimize strips on the video. Press “＋” or “－” to increase or
decrease the parameter settings.
Sharpness:
This setting is used to optimize the sharpness of the image. Select a value between 1 to 5.