Operation Manual

RAM

CPU

AGP

PCI Slot1

PCI Slot2

PCI Slot3

PCI Slot4

Card 2

Card 3

Card 1

Mother board

Installation

1. Turn off the PC’s power and unplug the power cable.

2. Open the PC’s cover and plug the capture card into an empty PCI Slot.

3. Make sure the card is firmly seated and aligned.

Note: When installing multiple cards in a single PC the total video channels may not

exceed 24 cameras. The proper card order is shown as below. The card nearest to

CPU will be the first card. Only card 1 need to be connected for Watch Dog

connection (see following page).