Operation Manual

22
camera here. Wrong setting will cause black & white
video and unstable video.
8 Compression
quality
Higher compression quality brings better recorded
video quality. But the recorded file size will also
become bigger.
9 Remote Preview To enable current camera for remote site viewing
10 Remote Playback To allow the camera to be playback from remote site.
7.3.1. Week Recording Schedule
Click on the “Setting” to get into the dialog of “Schedule record setting”
The camera video will be recorded according to this schedule.
There are 3 kinds of recording type available in the week schedule:
[Normal Recording] In the period of “Normal recording”, the video will be recorded at
the “normal recording frame rate” specified in “Camera Setting” dialogue.
[Event Recording] In the period of “Event recording”, the video will be recorded only
when there is event (Motion detect or Sensor detect) triggered. And the video will be
recorded at “Event recording frame rate” specified in “Camera Setting” dialogue.
[Mix Recording] In the period of “Mix Recording”, the video will be recorded at the
“normal recording frame rate” when there is no event triggered. And when there is
event triggered the video will be recorded at the “Event recording frame rate”
Note:
The [Mix recording] is most suggested to use storage more efficiently. For
example the user can set the video record at low frame rate(1 fps) in normal
situation and record at high frame rate(5 fps) when there is event triggered.
7.4. Sequence setting