Operation Manual

55
Router Configuration
In the Router, the user has to set the port mapping for Video Server.
In this case, the port is set as 8080 and the local IP address of video server is
192.168.0.22. So the user must set the port mapping 8080 to the 192.168.0.22
In below picture we use D-Link Router: DI-524 as a sample:
(Note: The configuration of different Router could be different, please refer to the user
manual of your own Router)
View by IE
In previous 2 steps the port: 8080 is mapped from the Video Server (192.168.0.22) to
the public already the user in remote site can type” Http://111.222.333.444:8080” in
the address bar of the IE.
Please specially note the user must input the user account and password on the web
page (for detail information please refer to DVR User Manual, Chapter9)
3. Network configuration(Stream Video by Remote Client Software)
User can also install the Remote Client Software in the remote site and use the
Remote Client Software to access the Video Server over Internet.
Installation and Setting of the Remote Client Software in the Remote Site PC.
Please refer to this part in this User Manual.