Operation Manual

Router Configuration

DVR Video Server uses the port 1350, 1351, 1353, 1355, and 1357 to communicate

with the Remote Client Software. So users have to map the Port mentioned above

from Video Server to the public. In this sample users have to map ports shown above

of 192.168.0.22 to the public ports: 1350, 1351, 1353, 1355, and 1357.

Please refer to Chapter 2.2 for detail information about the setup of port mapping in

the router.

DDNS

When you access internet and run DVR system by dynamic IP, it is suggested that

you should use the DDNS Client to define a domain name via internet. This

application will update the newest IP address from your DVR system to DDNS server

every 10 minutes. You just have to type your register hostname to get the internet

connection, if your DVR system IP address is changed.

This application uses port 80 and 81 to upload IP info to internet. If your DVR system

is built under router or firewall, please make sure that port 80 and 81 are already

enabled. DDNS Client is able to upload Global IP address only. If your system uses

virtual IP address, users please map the port 80 and 81communication port to DVR

server.